cheers
some pics to help
this mounting point has moved. twisted towards the ground, which means the other end of the rod wont line up with its mounting point properly
thats the old bent one
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bent panhard rod
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Bent panhard rod
Hey guys i managed to bend my panhard rod on my 99 jimny. Got a new one to fit, but it seems that when the rod bent that it has moved the mounting point. the one on the body still looks straight however the one on the axle looks like it has moved a little. Is the a way i can fix this so that the rod can be fitted. or is it more serious?
cheers
some pics to help
this mounting point has moved. twisted towards the ground, which means the other end of the rod wont line up with its mounting point properly
thats the old bent one
cheers
some pics to help
this mounting point has moved. twisted towards the ground, which means the other end of the rod wont line up with its mounting point properly
thats the old bent one
99 suzuki jimny 50mm spring spacers, 31 muddies on the way!
Re: Bent panhard rod
It should still line up.
You will have to use a lever to move body over.
With the bracket put a jack under it and run a 20mm weld bead on either side.
Bazzle
You will have to use a lever to move body over.
With the bracket put a jack under it and run a 20mm weld bead on either side.
Bazzle
Re: Bent panhard rod
i used a pipe wrench to give it a little twist so that it would line up... seems to have worked fine.... time will tell
99 suzuki jimny 50mm spring spacers, 31 muddies on the way!
Who is online
Users browsing this forum: No registered users and 3 guests