hi all,
im building a 45series, and am wondering what ideas have been used for mounting seat brackets, it has to pass engineering. i have a couple of idea's but want to do it right the first time, was wondering what material to use e.g. flat bar, rhs boxing, or even a bit of channel, do i weld or bolt and whats the go with the hieght, as it has the two blocks at the front do i need to space the back so it's level,
cheers for youre help guys
loose
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
45 series, mounting sport seat
Moderators: toaddog, Elmo, DUDELUX
45 series, mounting sport seat
" You can't fix it if you don't break it "
Re: 45 series, mounting sport seat
you will find height is not to much of a problem its is maily the center line to S-wheel thats is important bolting rails to the original frame makes it easy and should pass ..also make sure it moves freely and allows good adjustment front to rear as they tend to check it ..also make sure the seat is firm and doesnt move around on the rails as they will say its to worn and replace it
71 fj40 front shackle reversal +3" , 55 rear springs +3", 35 15.5 claws , 60 diff's 4wheel disc's , SOON TO BE WINDSOR V8 + 5 speed
74 fj40 stock but very clean
84 bj40 3b stock and unloved
74 fj40 stock but very clean
84 bj40 3b stock and unloved
Re: 45 series, mounting sport seat
so just use some flat bar an bolt to the tub and then but bolt the seat rail (and seat of course) to the flat bar, sounds pretty simple
loose
loose
" You can't fix it if you don't break it "
Re: 45 series, mounting sport seat
We used 50x50 angle on mine old shorty. Mounted XF Fairmont seats.
Can't find my pics of it here.....
There was a good thread not too long ago on this tho.....
Can't find my pics of it here.....
There was a good thread not too long ago on this tho.....
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Re: 45 series, mounting sport seat
yea i had a search, but couldn't pull anything up, any ideas what it was called. the angle sounds to be a good idea, that's what i was thinking of, how would it go with engineering?
" You can't fix it if you don't break it "
Re: 45 series, mounting sport seat
loosecanon wrote:yea i had a search, but couldn't pull anything up, any ideas what it was called. the angle sounds to be a good idea, that's what i was thinking of, how would it go with engineering?
No idea.
Try sports seats of something lol
Mine was Engineered and Approved. Went for Rego that way, No issues
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Re: 45 series, mounting sport seat
Show us a pic of what you have and what you are thinking
hands and mums dont count!!!
Re: 45 series, mounting sport seat
Yea no problem ill get pic's tonight , and post them for all to see!! wow this will be my first pic of my truck on here,
" You can't fix it if you don't break it "
Who is online
Users browsing this forum: No registered users and 0 guests