td42 intake manifold

[insane_patrol]

hey guys,

just wondering does anyone know where i can find custom intake manifolds for the td42? i have dts turbo running 15psi and am fitting custom 800hp w2a plazmaman intercooler kit with 620x330x40 heat exchanger core size apparently they tell me is best option for diesel as i will be looking at runnning 20+ when i purchase the custom jpc turbo and have been told the stock intake manifold wont be good enough for air flow.
any help would be great and also if you have any other idea regarding intercooling as i havent purchased the kit yet and is $2400 with fan and pump and rad and cooler.

cheers

[Dzltec]

Inbuilt laminova will cure your problems.

Andy

[garth]

x 2...read the thread - the output figures speak for themselves.

[love ke70]

go laminova, cooler and manifold all in one
best thing i did for my truck

[PGS 4WD]

I built my own. We have done a number for various vehicles, there won't be anything wrong with your intercooler, you have already spent the money, they are a quality cooler I run one on my XR6 Turbo and I picked up 30 rwKw as the cooler intakes allow the engine to run about 3-4 degrees more total timing without knock/pinging.

Joel

[garth]

what's it look like Joel? anything ground breaking?

[tye1986]

heres mine i just finished will c how it works by the week end but should keep the egts lower due to same air flow to each cylinder (hopfully)

[PGS 4WD]

I've no idea where mine is now, the engine has since been sold twice.
Here is an old photo from when I was building it that shows most of the manifold.

[awill4x4]

heres mine i just finished will c how it works by the week end but should keep the egts lower due to same air flow to each cylinder (hopfully)

Before putting it on your TD42, I would respectfully suggest you pressure test it 1st, particularly on the water side. You can't afford a water leak getting into the inlet manifold.
Regards Andrew.

[tye1986]

yeh have pressure tested it, it is the s ame water to air i have used for a yr just cut the outlet off and sheeted it into the manifold.

[Raisins78]

who sells laminova stuff? just googled the name and found the round cores.
Does someone make a Patrol kit? like manifold etc to suit my GU with the laminova cores?

[Dzltec]

Matt mcinnes does. http://advancedhbintercoolers.com/" onclick="window.open(this.href);return false;



Andy

[Raisins78]

Thanks heaps. and might i say, that is alot cheaper than i expected! $1600 for the TD42 kit. throw in some pipe and joiners from the turbo and its done.
what sort of increases did you guys see, if you dont mind me hijacking this thread.....

[nastytroll]

Joel, I have your motor. Did you have a body lift to fit the cooler in? I will be fitting the motor in the next few weeks hopefully.

[PGS 4WD]

No, no body lift

[coxy321]

Thanks heaps. and might i say, that is alot cheaper than i expected! $1600 for the TD42 kit. throw in some pipe and joiners from the turbo and its done.
what sort of increases did you guys see, if you dont mind me hijacking this thread.....

Have a read of this:
http://forum.outerlimits4x4.com/viewtop ... t=laminova" onclick="window.open(this.href);return false;

[matt.mcinnes]

Thanks heaps. and might i say, that is alot cheaper than i expected! $1600 for the TD42 kit. throw in some pipe and joiners from the turbo and its done.
what sort of increases did you guys see, if you dont mind me hijacking this thread.....

Have a read of this:
http://forum.outerlimits4x4.com/viewtop ... t=laminova" onclick="window.open(this.href);return false;

Reduced now to $1300

http://www.patrol4x4.com/forum/showpost ... stcount=13" onclick="window.open(this.href);return false;

[love ke70]

1300!?
thats a steal!

matt, still getting air in my system, will email you tomorrow with pics of what i ahve done and a better description, please harass me if i forget, its bugging me haha

[bj on roids]

What sort of power and torque are you guys making with the TD42?

What can you get reliably out of a stock one?

[matt.mcinnes]

What sort of power and torque are you guys making with the TD42?

What can you get reliably out of a stock one?

Stock with no pump mods around 105rwkw on a GQ

[bj on roids]

What sort of power and torque are you guys making with the TD42?

What can you get reliably out of a stock one?

Stock with no pump mods around 105rwkw on a GQ

cheers.

[matt.mcinnes]

What sort of power and torque are you guys making with the TD42?

What can you get reliably out of a stock one?

Stock with no pump mods around 105rwkw on a GQ

cheers.

You can get more reliably but you need to mod the pump.