Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Coil spacers for XL-7

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 38
Joined: Sat Dec 30, 2006 4:03 pm

Coil spacers for XL-7

Post by keatings »

Hey guys and girls,

I have fitted the ironman lift to our xl-7 and put some 225/70/16 maxxis on.

Still looking for a little extra height in the back mainly. Coil spacers a good idea? if so are the easy to fit and does anyone have a good list of basic steps to tae to do so?

Thanks,

P.S if anyone needs advice on other xl-7 extras or mods I am happy to advise as we have spent a few $ recently on this car and may be able to offer some feedback if I can on the below items

TJM BAr

Tints

Clutch

Tyres

IPF lights

Roof racks

Ironman lift

More to come soon.
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: Coil spacers for XL-7

Post by BlueSuzy »

try auszookers.com.
I am Tim
Top
Posts: 27
Joined: Tue Mar 09, 2010 8:06 pm
Location: Forster

Re: Coil spacers for XL-7

Post by guppy »

I run a 30mm coil spacer on my GV with OME springs and its fine... you just need to check that you will have enough shock length.

I just put a bit of adhesive on top just in case.

Let me know if you need anything further.
1999 Grand Vitara - Custom 50mm Suspension lift - 50mm body Lift - 245/70 R16 Tyres - future plans Diff lock, Bull bar and Sliders
Top
Posts: 37
Joined: Sun Jun 21, 2009 11:33 pm
Location: Australia; Canberra

Re: Coil spacers for XL-7

Post by jimny_99 »

I have 50mm spacers on my jimny, found them on ebay for about 70 a corner.

Really easy to fit if you can get your hands on a pair of coil spring clamps
http://coilspringcompressor.co.uk/image ... ressor.jpg" onclick="window.open(this.href);return false;

Something similar to that.

Also bigger shocks may be needed to accommodate the extra travel.

its as easy as jacking her up. dropping the axle and then putting the spacers in.
99 suzuki jimny 50mm spring spacers, 31 muddies on the way!
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Re: Coil spacers for XL-7

Post by joeblow »

jimny_99 wrote:
its as easy as jacking her up. dropping the axle and then putting the spacers in.

jimny yes.....vitara no.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 27
Joined: Tue Mar 09, 2010 8:06 pm
Location: Forster

Re: Coil spacers for XL-7

Post by guppy »

To fit them... the back is easy just undo the shocks and drop the diff down, watch the brake lines and stuff when you do it and you may find it easier to use a spring compressor to get them back in.

The front is a complete different thing... IFS... you need to use a spring compressor and from memory i had to drop the control arm when putting it all back together... its not the easiest thing if you are not sure maybe get a mechanic to pop them in for you... once the front is done remember to get a wheel alignment.
1999 Grand Vitara - Custom 50mm Suspension lift - 50mm body Lift - 245/70 R16 Tyres - future plans Diff lock, Bull bar and Sliders
Top
Posts: 38
Joined: Sat Dec 30, 2006 4:03 pm

Re: Coil spacers for XL-7

Post by keatings »

Thanks guys i may just get a mechanic to do it. I may crack the poos with it if i stuff up.

Thanks for the help
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 36 guests