Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engine conversion on the 60 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 4
Joined: Sat Mar 06, 2010 10:53 am
Location: Melton,Victoria,Australia

engine conversion on the 60 series

Post by M8ofthemud »

My 2h just blew a poop'le valve and shot a 5-7 inch hole in the block what is going to replace the old faithful 2h??????? it must have balls It cant cost a million $ 'Z it must have balls> It must have a thirst for diesel> and MUST HAVE BALLS!!!!!!!!!!!!!!!!!!!!!!! oh yeh and it must have big muddy hairy f*uken Balls
Posts: 438
Joined: Thu Jun 24, 2004 4:58 pm
Location: wollongong

Re: engine conversion on the 60 series

Post by Stackson45 »

a dirty great big bull that drinks deisel??

What about a big/powerful engine?
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Re: engine conversion on the 60 series

Post by oldmate »

1hz plus a turbo, or the 1hd factory turbo. They go in with relative ease. If the budget stretches, get a late 70 series v8 diesel wreck and drop the whole drive line in. Measure first, the v8 might be too wide for the 60.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Re: engine conversion on the 60 series

Post by Kitika »

350 chev. No such thing as a cheap diesel with power.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 745
Joined: Sat Aug 02, 2008 9:45 am
Location: Vanuatu/ QLD

Re: engine conversion on the 60 series

Post by thrashlux »

DURAMAX!!!!!!!!!!!!!!!!!!!!!!!!

BIGGEST BALLS OF THEM ALL

BUT BIG $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Re: engine conversion on the 60 series

Post by Wambat »

simple, 12ht, drops straight in, dont need engineers cert, and can have plenty of power
Go Hard Or GO Home
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Re: engine conversion on the 60 series

Post by oldmate »

Wambat wrote:simple, 12ht, drops straight in, dont need engineers cert, and can have plenty of power
If you can find one. For what they are worth second hand you could have a 1hz in. Same power, but revs all the way to 4000rpm no hassles. a 12ht at 4k is like holding onto a v8 powered vibrator.

I know what 12ht's are capable of, but if you want driveability a little closer to a petrol engine, the 1hz/1hd is the way to go
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Re: engine conversion on the 60 series

Post by Wambat »

is the 1hz 1hd, still mechanical injection.

also with those motors, you still have to get engineers cert, they will probably need different engine mounts, and you will have to use a different gearbox.

the 4 k for a 12ht, is pretty much the end of it, no more costs, where as dropping in anything else is going to require aditional costs. money which could be spent on upgrades.
Go Hard Or GO Home
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: engine conversion on the 60 series

Post by Shadow »

oldmate wrote:
Wambat wrote:simple, 12ht, drops straight in, dont need engineers cert, and can have plenty of power
If you can find one. For what they are worth second hand you could have a 1hz in. Same power, but revs all the way to 4000rpm no hassles. a 12ht at 4k is like holding onto a v8 powered vibrator.

I know what 12ht's are capable of, but if you want driveability a little closer to a petrol engine, the 1hz/1hd is the way to go
I find quite the opposite. The 12HT is a much nicer engine to drive. It makes its max torque alot earlier which means you don't have to rev the crap out of it.

Its also Direct Injected, and designed for a turbo. So wind that boost up and you have a much better engine than a 1HZ even if it has a turbo added.

And as already mentioned, everything just about bolts up. No mod plate, easy!
03 HDJ100R GXL / 94 FJ45-80
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests