Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

transfer case 80 series wah

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 5
Joined: Wed Mar 10, 2010 3:50 pm
Location: brisbane

transfer case 80 series wah

Post by kean80cruise »

Hi,

My poor 80 series has a major problem, its only 2wd!

The problem has been diagnosed as something in the transfer case.

I have been qouted $1000 to take it apart and rebuild it, then whatever is wrong with it i will have to buy parts etc.

My question is,

Is it easy to take out screw around with or whatever, or can I buy a reconditioned one or should i bite the bullet and get it done.
My concern is if they take it apart, its totally effed and i payed 500 bucvks for nothing.
any help would be appreciated or advise.

Thanks

Kean
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Re: transfer case 80 series wah

Post by dow50r »

Kean, i have a good one in wollongong...you may be able to get one closer to home...better to buy one working and bolt it in, then save the $$ 300 max is the going price
Confucious say...man who argue with idiot, worserer himself
Posts: 5
Joined: Wed Mar 10, 2010 3:50 pm
Location: brisbane

Re: transfer case 80 series wah

Post by kean80cruise »

300 for the transfer case? or 3000"? sorry i never bought one before.
Just wandering does it have to be a 80 series transfer case?
Can you drive the car without it if you take it out to repair?
How big is it and how do I know yours is working AND are they easy to install :D

More info would be much appreciated.

Kean
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Re: transfer case 80 series wah

Post by Ice »

$300, no you cant drive the car without it

they weigh a bit easy enough to bolt on if you have somone help you do it
xxxx wrote:
:bad-words: :snipersmile:
Posts: 1105
Joined: Wed Jan 23, 2008 8:56 pm
Location: central coast down under

Re: transfer case 80 series wah

Post by stilivn »

Open it up and have a look. Not too hard to do if not your daily driver. If its in the rear part maybe fitting a part time kit, 600 bucks max could be a fix if your lucky, If not its only taken a day of your time.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest