Hey,
Just chasing up an issue with a mates GU. His is an 05 model with the 3lt td engine, 5 spd manual running 285/75/16 muddies. He has recently fitted a 2inch ironman suspension lift and now has bad driveline vibration.
The car has only travelled 60000kms from new, and before he bought it, it has a solid flywheel and new clutch installed, as well as new engine mounts (that was only a yr ago), so they couldn't be the problem. Also, he's only just had the muddies put on a month ago and are all balanced so thats shouldn't be a prob either.
The vibration comes in for less that a second under acceleration at 40km/h, but then a longer lasting vibration which according to him "felt like the car was falling apart" at 80km/h.
I build driveshafts for a job, so replaced his unis and balanced the shaft thinking these may be buggered. We took it for a test drive and the vibration was gone at 80km/h, but the vibration at 40km/h was still there. He said today though that the vibration at 80 sounds like its coming back, and it was only last friday that we put the new tailshaft in.
Now, is it possible that with only a 2 inch suspension lift that driveline angles could be an issue? I haven't measured them yet, but will be this weekend. Any other ideas as to what could cause this?
Oh, just a quick note, he said last night he hooked up his camper trailer for a few mins and took it for a drive, and the vibration all but disappeared...
Thanks guys
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU vibration after only 2in susp lift??
Re: GU vibration after only 2in susp lift??
very similar thing has happened to me before
camper trailer on drove sweet took it off when fourbying drove home from landcruiser park no porblems took the camper trailer off drove it and had a very bad vibration but disappeared when i swerved so put it down to tires but never came back to haunt me. I didnt replace tires or get them balanced only lasted a day or too
very interested, let me know how you go with it
camper trailer on drove sweet took it off when fourbying drove home from landcruiser park no porblems took the camper trailer off drove it and had a very bad vibration but disappeared when i swerved so put it down to tires but never came back to haunt me. I didnt replace tires or get them balanced only lasted a day or too
very interested, let me know how you go with it
GU coil cab - F+R lockers - 4.6 ratio gears - 35" MTZ
Re: GU vibration after only 2in susp lift??
Sounds like diff pinion angle... strange for a 2"... Try borrow someones adjustable lowers and see if that solves it???
Re: GU vibration after only 2in susp lift??
Yep, or borrow a set of standard road tyres that are known to be balanced and true.steve patrol wrote:Sounds like diff pinion angle... strange for a 2"... Try borrow someones adjustable lowers and see if that solves it???
Who is online
Users browsing this forum: No registered users and 3 guests