ok i have got a tb42 patrol and want to change it to a td42. what i want to know is what i need to do the transplant i already know i need a bell housing, fueltank, lines ect but any help with the finer things would be great. i have a complete engine available to me and wiringloom from the diesel. thanks in advance.
ok i have looked into it further and have got on to vic roads and they say that i have to have a enganeers report done. has anyone done this in vic and what did you have to do to get it on the road?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tb42 to td42
tb42 to td42
Last edited by Jake GQ.. on Fri Sep 24, 2010 4:05 pm, edited 1 time in total.
Re: tb42 to td42
There is a few threads on this, if thou uses the search function ye shall find
Here's one from couple of weeks ago....
http://www.outerlimits4x4.com/viewtopic ... 5&t=215256" onclick="window.open(this.href);return false;
Here's one from couple of weeks ago....
http://www.outerlimits4x4.com/viewtopic ... 5&t=215256" onclick="window.open(this.href);return false;
Don't take life too seriously...it isn't permanent.
Re: tb42 to td42
...............
Last edited by chpd80 on Wed Nov 10, 2010 8:52 pm, edited 1 time in total.
Re: tb42 to td42
when i done mine i didnt have to change any lines to the tank. or the tank itself. only thing i had to modify there was the filler neck and all i did was knock the restricer flap out. not it easily handles hiflow bowsers no dramas. didnt even need to swap senders.
bellhousing is different. rad is different,
i swapped the whole wiring harness to the diesel one from under the passneger seat to under the engine bay. lines matched straight up for me. then just swapped everything over.
i had another car though when i done mine. so made it real easy. only other issue i run into was engine mounts. but there is NO need to stress if the chassis is a 2 bolt style and the engine is 4 bolt style or vise vesa. just swap the brackets on the engine to the other type and hey presto. it bolts up.
its a real easy conversion if done right and mine looks very much factory so you would hardly know. even the exhaust will bolt up if you dont have extractors on her. in which case just swap the extractors over to the td42 and she will be roses.
bellhousing is different. rad is different,
i swapped the whole wiring harness to the diesel one from under the passneger seat to under the engine bay. lines matched straight up for me. then just swapped everything over.
i had another car though when i done mine. so made it real easy. only other issue i run into was engine mounts. but there is NO need to stress if the chassis is a 2 bolt style and the engine is 4 bolt style or vise vesa. just swap the brackets on the engine to the other type and hey presto. it bolts up.
its a real easy conversion if done right and mine looks very much factory so you would hardly know. even the exhaust will bolt up if you dont have extractors on her. in which case just swap the extractors over to the td42 and she will be roses.
Re: tb42 to td42
.............
Last edited by chpd80 on Wed Nov 10, 2010 8:53 pm, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 0 guests