Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3.9 Disco EFI wireing?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

3.9 Disco EFI wireing?

Post by RUFF »

Anyone here ever wired a 3.9 disco motor up in anything else? I need a wireing diagram to wire the efi harness up to another vehicle not a rover. Can prob work out what needs to be wired and what can be left out but if someone has done one and has some info that would be great.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

:roll: :?
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

Is there a diagram in Sam's Haynes book ??


Tom
Top
Posts: 33
Joined: Tue Mar 16, 2004 11:04 pm
Location: brisbane

Post by Cranky »

The wireing diagram in my Hayes manual was good enough. I have a computer if you need one. Am running an old motec on mine.
Bloody Range Rover drivers !!!
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

Cranky wrote:The wireing diagram in my Hayes manual was good enough. I have a computer if you need one. Am running an old motec on mine.


The disco manual only had the diesel engine in it and the rangie 3.9 is a fair bit different, if you have the comp version of a disco V8 I would love a copy,

Thanks
Tom
Top
Posts: 33
Joined: Tue Mar 16, 2004 11:04 pm
Location: brisbane

Post by Cranky »

I didn't realise the engine harness would differ that much from rover to disco. Mine was for the rover. :oops:
Bloody Range Rover drivers !!!
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

Cranky wrote:I didn't realise the engine harness would differ that much from rover to disco. Mine was for the rover. :oops:


me neither till the other day
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

If anyone can help out with any details that would be great!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Just thought i would update this with some info for others wanting to do an EFI conversion on an earlier Rangie or similar.

I just fitted an early disco 3.5 EFI kit to my hilux. This is slightly different in the wireing on the 3.9 but is prob the same to wire.

I only had to hook up 3 wires to get this to run.

Brown wire- Battery +
White with a Red Trace- Ignition Sorce
White with Purple Trace to Fuel Pump +

There is also a White with a Yellow trace that is the Check engine light but i havent added this yet.

And it runs perfect.

It obviously has an earth in the harness as well but you cant miss this as its all on its own and has a bolt on eye at the end of it. And there is also a single wire near the Airflow meter that plugs onto the negative side of the coil.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

wiring

Post by Loanrangie »

Hi Tony, are you using rover ecu and air flow meter ?

Nick.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Yes all stock disco parts. Its fitted to a 3.9ltr disco motor.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 2 guests