I see a lot of stainless or "plastic" snorkels but hardly any custom aluminum ones, is there a reason? I can get 1/8" thick wall 4" aluminum tube for way cheaper than stainless. I'm pretty sure it'd be plenty strong and easier to paint.
Your thoughts?
Thanks,
David
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Aluminum Snorkel, why not?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: Aluminum Snorkel, why not?
There is no reason at all......... I use it all the time........if you can work with it, use it.
Here is one I did on a Razor......
All ally , some polished some painted........
Here is one I did on a Razor......
All ally , some polished some painted........
Harb
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
Re: Aluminum Snorkel, why not?
Nice work Harb, is that your Polaris thingy??
MrsForby wrote: Oh I desperately truly love the taco.
Re: Aluminum Snorkel, why not?
Tis mate, its one of the 2 we took to the cape a few weeks back........ man that was a fun trip,,,would go again tomorrow
Harb
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
Any pics from the trip? I remeber you posted about it before you left and it sounded like it would be awesome!Harb wrote:Tis mate, its one of the 2 we took to the cape a few weeks back........ man that was a fun trip,,,would go again tomorrow
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Re:
There is a heap of pics on facebook!v840 wrote:Any pics from the trip? I remeber you posted about it before you left and it sounded like it would be awesome!Harb wrote:Tis mate, its one of the 2 we took to the cape a few weeks back........ man that was a fun trip,,,would go again tomorrow
hands and mums dont count!!!
Re: Aluminum Snorkel, why not?
Seen plenty in alloy. Doesnt even need to be 1/8, can be 1/16th But it is harder to weld, and dents easier and painted is not as bling as polished stainless.Abitibi wrote:I see a lot of stainless or "plastic" snorkels but hardly any custom aluminum ones, is there a reason? I can get 1/8" thick wall 4" aluminum tube for way cheaper than stainless. I'm pretty sure it'd be plenty strong and easier to paint.
Your thoughts?
Thanks,
David
hands and mums dont count!!!
Re: Aluminum Snorkel, why not?
Mine was made with off cuts
Just tidied up the hole afterwars with a bit of half cut rubber hose.
That snorkel cost me nothing at all to make just about 2 hours of time.
Just tidied up the hole afterwars with a bit of half cut rubber hose.
That snorkel cost me nothing at all to make just about 2 hours of time.
Current ride,
96 GQII TD42
Previous rides,
87 High Lux single cab. Yes she was my first!
93 80 series Land Cruiser.
Project Zook Vitara. Previously rolled! So I just had to get the 9 inch out!
96 GQII TD42
Previous rides,
87 High Lux single cab. Yes she was my first!
93 80 series Land Cruiser.
Project Zook Vitara. Previously rolled! So I just had to get the 9 inch out!
Who is online
Users browsing this forum: No registered users and 0 guests