Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

my little build log...

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 51
Joined: Thu May 01, 2008 6:28 pm
Location: Brisbane

my little build log...

Post by mrpham »

So been having problems with Roza for awhile now, bad oil leakS, running very rich, burning a lot of oil too, the list goes on...

Decided to put a "new" motor into her so I picked up a Daihatsu Applause motor last week and started working on it a few days ago.
http://www.outerlimits4x4.com/viewtopic ... 8&t=214095" onclick="window.open(this.href);return false;

I've got some photos below:
Image Image Image

Image Image Image

Image Image Image

Image Image Image
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Re: my little build log...

Post by chugga »

Great pics! You finished yet?
Posts: 51
Joined: Thu May 01, 2008 6:28 pm
Location: Brisbane

Re: my little build log...

Post by mrpham »

Nah not yet :)

I decided that while the motor is out, that I will replace a few fittings and hoses. So going to visit Daihatsu/Toyota spares tomorrow to pick up a few parts.
Posts: 51
Joined: Thu May 01, 2008 6:28 pm
Location: Brisbane

Re: my little build log...

Post by mrpham »

So more photos from yesterdays work.

Image Image Image

Image Image Image

Image Image Image

Image Image Image

Image Image Image

Image Image Image
Posts: 18
Joined: Thu Sep 30, 2010 6:25 pm

Re: my little build log...

Post by bexi »

Looks good!
Did you have trouble getting the old sump gasket off the block and sump?
Did you ue gasket goo rather than a new gasket on the sump?
Posts: 51
Joined: Thu May 01, 2008 6:28 pm
Location: Brisbane

Re: my little build log...

Post by mrpham »

Haven't updated in awhile, but everything went well and car is running really nice now :)
bexi wrote:Looks good!
Did you have trouble getting the old sump gasket off the block and sump?
Did you ue gasket goo rather than a new gasket on the sump?
Just use a razor blade to remove the old gasket goo, and Daihatsu don't make a gasket for the sump. Even the service manual shows that you have to use goo.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests