Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

miss in my 6g72

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 36
Joined: Fri Jun 04, 2010 10:03 am
Location: cairns

miss in my 6g72

Post by deepdiverdave »

i have a triton with the sohc 6g72 and it has a distinct miss. am trying to narrow it down to get it fixed as i think it is majorly effecting my fuel consumption as i only got 340k's off 1 tank (was taking it easy changing at 2500 rpm)
any thoughts as to what it could be and how to fix it ?
i was thinking it could be a burnt out valve but i don't know too much about engines which is why im here so please help as all input will be greatly appreciated.
Posts: 511
Joined: Tue Jan 15, 2008 1:33 pm
Location: Cooma NSW

Re: miss in my 6g72

Post by date »

I was hoping that some of the gurus on this site would have come in by now, but no - they must be asleep.

A bit more information may assist in diagnosis. Is the miss always there or does it only appear at odd times eg when you are accelerating, turning corners, at idle etc? If it there always, it may be something as simple as an ignition lead or spark plug.

Firstly, check all the plugs and leads. If it is a 6g72, I assume that you can get to all the plugs and leads I have a 6G74 and to do this is a major dismantle of the top of the engine. Examine all the plugs - do they all look the same. If so, you probably have troubles somewhere else, but if one looks sooty or cagged up, then the troubles are in that cylinder and you should then look at the leads to cehck for continuity.

Do this and then report back. The gurus can then assist with diagnosis with better information.
Posts: 36
Joined: Fri Jun 04, 2010 10:03 am
Location: cairns

Re: miss in my 6g72

Post by deepdiverdave »

Thanks mate will check when i finish work and let you know how it goes.
i do know that all the leads where replaced shortly b4 i baught it at the start of last month but have no idea about plugs.
Posts: 9
Joined: Mon Jul 12, 2010 3:25 pm

Re: miss in my 6g72

Post by swifty_ano »

Mate pm me if you want a new engine :)
you can buy my whole triton for $2200 with the 3L v6. Had a recent rebuild.
Posts: 36
Joined: Fri Jun 04, 2010 10:03 am
Location: cairns

Re: miss in my 6g72

Post by deepdiverdave »

thanks for the offer mate but if im gonna put a different engine in im gonna go bigger v6 conversions have a kit for me but are yet to reply what engine it would be for.
however i finally managed to get the time to check the plugs one was a bit fouled up upon starting the engine and taking the lead off it there was no change so i have just got some more plugs for it and will see if it helps :D let you all know tomorrow
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Re: miss in my 6g72

Post by bakerboy »

gonna be a fair bit of work to get the commy in, good luck
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Re: miss in my 6g72

Post by NJV6 »

If changing the plug doesn't alter it, make sure you try changing the lead also. Test the resistance along the lead with a ohmmeter, less resistance = good
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Posts: 36
Joined: Fri Jun 04, 2010 10:03 am
Location: cairns

Re: miss in my 6g72

Post by deepdiverdave »

good idea thanks mate
Posts: 36
Joined: Fri Jun 04, 2010 10:03 am
Location: cairns

Re: miss in my 6g72

Post by deepdiverdave »

just ducked home from work to see if it helped and its running much smoother with new plug :armsup: but could hear spark jumping put my hand on the dizzy and then moved it of rather fast :shock: turns out the lead from the coil to the dizzy was jumping to the lead that ran to the fouled plug so have just got a replacement through a mate and will see if it works tonight :armsup:
Posts: 36
Joined: Fri Jun 04, 2010 10:03 am
Location: cairns

Re: miss in my 6g72

Post by deepdiverdave »

bakerboy just herd back from the conversion guys and it will be for the vs to vy comm engine so hope that includes the gen3 5.7l v8 with the 6sp box :crazyeyes: will be a huge job but will be very satisfying when i have the end result :armsup:
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Re: miss in my 6g72

Post by NJV6 »

To find the short, just run the vehicle at night in a dark area. Open the bonnet then have a look. If you have a jumping arc then it looks really cool!!!
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Posts: 36
Joined: Fri Jun 04, 2010 10:03 am
Location: cairns

Re: miss in my 6g72

Post by deepdiverdave »

yeah that would look cool and i could have used that advice b4 :lol: i lust put my finger in the leads till i got the strongest zap :D and found that where the coil to dizzy lead went into the dizzy was the strongest so will see tonight after training.
hope its as simple a that will be a bit of a relief :cool:
Posts: 511
Joined: Tue Jan 15, 2008 1:33 pm
Location: Cooma NSW

Re: miss in my 6g72

Post by date »

If you are getting zapped by the HT leads, it sounds as if you need to replace all the leads. Whilst you are at it, you may as well look at the distributor cap as well - it sounds as if there is a high resistance somewhwere inside the cap. Maybe the rotor, maybe inside the cap itself?

Why not put in a complete set of spark plugs, leads as well. It is a lot cheaper than replacing the whole engine.
Posts: 36
Joined: Fri Jun 04, 2010 10:03 am
Location: cairns

Re: miss in my 6g72

Post by deepdiverdave »

problem solved thanks far your help peeps :armsup: :armsup: :armsup: i don't care what people say bout you fellas your all top blokes in my book :cool:
Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests