Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Shock length
Shock length
Iv'e had a good search but can't find the info that I need. I am looking to import some Bilstein 7100s from the states and need to know the collapsed and open length of shocks to suit a 2" lift for a GQ patrol.
Re: Shock length
Fronts 296mm closed 486 open
Rears 410mm closed 664 open
Rears 410mm closed 664 open
www.suspensionstuff.com.au
call 1300 048 991
Ask for Steve. I will look after you!
call 1300 048 991
Ask for Steve. I will look after you!
Re: Shock length
If you are getting Bilstiens then get German ones, yellow. I tried the 5100 and they couldn't even be revalved due to the way they were assembled, it would have required shortening them. The valving for my JK was so bad I got my money back. Lucky I used an Australian supplier.
Joel
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Re: Shock length
7100 series only come in eye-eye mounts and even in the short body series, the shortest compressed length they do is 407mm.
In other words, you can't just bolt them in as part of a 2' lift.
In other words, you can't just bolt them in as part of a 2' lift.
Who is online
Users browsing this forum: No registered users and 100 guests