Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gearbox sticking in 3rd

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 17
Joined: Thu Sep 30, 2010 7:09 pm

Gearbox sticking in 3rd

Post by daniel7000 »

Every now and then my gbox gets stuck in third gear and it's very hard to pull out. Someone told me the synchro was shot.
I would have thought if the synchro was gone it would make it hard to get into gear not getting it out of gear.

Any ideas?

86 Troopy.

Thanks.
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Re: Gearbox sticking in 3rd

Post by oldmate »

could be a syncro or could be in the linkages. Time for a rebuild. Given how old they are now you could probably get a used box from a wreckers pretty cheap.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Re: Gearbox sticking in 3rd

Post by BadMav »

Fix it (or replace it) before it stays in third. Not fun driving in traffic starting in low range and grinding into high range. Although that was a 4 speed in a 45 series ( I replaced it with a 75 series fiver). I would assume it will end the same for you in time.
Don't take life too seriously...it isn't permanent.
Posts: 17
Joined: Thu Sep 30, 2010 7:09 pm

Re: Gearbox sticking in 3rd

Post by daniel7000 »

Thanks for the replys. Today I dropped the box out and took off the top. Was rushed for time so just had a quick look. The brass syncros look rooted on the third gear syncro.
Will pull out shaft and inspect them properly when I get the time. The gears all look like new. Anyone know the best place to get parts for these boxes?

Thanks
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: Gearbox sticking in 3rd

Post by hulsty »

Try your local bearing joints, CBC or something.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests