Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gu diff ?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 30
Joined: Mon Feb 22, 2010 2:11 pm
Location: forster

gu diff ?

Post by drysie. »

will a 4.1 rear gq diff centre fit a gu rear that was a 2.8 4.6 centre? thanks
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Re: gu diff ?

Post by toughnut »

There were only 2 different diffs available on both models. Its the size of the diff housing that is different. So if its the same diff then you can swap the centers to your hearts content.
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 257
Joined: Sun Mar 25, 2007 7:44 pm
Location: D' Aguilar

Re: gu diff ?

Post by beast of a GQ »

I went 4.6 centres out of a GQ 2.8 into my 04 model GU 3L. It was a simple swap just had to swap the flanges over. Just one big nut. easy as. Just make sure the housing are the same size and everything will be easy as.

Cheers,
Shane
04 GU Wagon 3L TD. 33's, 3" flexy coil lift. Kicker stereo, LOUD

GQ TD4.2 Extra Cab, 6" Flexy coil lift, Pro comps, 3rd's upper and lowers, 37 boggers. Plenty more to come.
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Re: gu diff ?

Post by mud4b »

yeah you would need the h233 diff (smaller) if its a gq center going in, these are the most common anyway. does that mean your selling a rear 4.6 center?

cheers mark.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Re: gu diff ?

Post by thehanko »

beast of a GQ wrote:I went 4.6 centres out of a GQ 2.8 into my 04 model GU 3L. It was a simple swap just had to swap the flanges over. Just one big nut. easy as. Just make sure the housing are the same size and everything will be easy as.

Cheers,
Shane
And get the backlash correct when redoing up the nut.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests