Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gu diff ?
Re: gu diff ?
There were only 2 different diffs available on both models. Its the size of the diff housing that is different. So if its the same diff then you can swap the centers to your hearts content.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Re: gu diff ?
I went 4.6 centres out of a GQ 2.8 into my 04 model GU 3L. It was a simple swap just had to swap the flanges over. Just one big nut. easy as. Just make sure the housing are the same size and everything will be easy as.
Cheers,
Shane
Cheers,
Shane
04 GU Wagon 3L TD. 33's, 3" flexy coil lift. Kicker stereo, LOUD
GQ TD4.2 Extra Cab, 6" Flexy coil lift, Pro comps, 3rd's upper and lowers, 37 boggers. Plenty more to come.
GQ TD4.2 Extra Cab, 6" Flexy coil lift, Pro comps, 3rd's upper and lowers, 37 boggers. Plenty more to come.
Re: gu diff ?
yeah you would need the h233 diff (smaller) if its a gq center going in, these are the most common anyway. does that mean your selling a rear 4.6 center?
cheers mark.
cheers mark.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Re: gu diff ?
And get the backlash correct when redoing up the nut.beast of a GQ wrote:I went 4.6 centres out of a GQ 2.8 into my 04 model GU 3L. It was a simple swap just had to swap the flanges over. Just one big nut. easy as. Just make sure the housing are the same size and everything will be easy as.
Cheers,
Shane
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Who is online
Users browsing this forum: No registered users and 13 guests