Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ebay engine rebuild kit for a 3l 2.8d hilux (now with pics )

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 105
Joined: Sat Aug 25, 2007 10:19 pm
Location: newcastle

Ebay engine rebuild kit for a 3l 2.8d hilux (now with pics )

Post by davenmarcia »

Hi guys I'm after opinions on ebay engine rebuild kits for a 2.8 3l hilux engine the current engine i'm looking at rebuilding was out of a 4runner that i got for parts etc at a salvage auction so I do not know its history except it had a new timing belt done 2000kms ago it has a denco turbo on it and done 257000kms it ran fine but thought while it was out should i rebuild it.? I will have the help of a deisel mechanic .

Is there a difference in these 2 kits

http://cgi.ebay.com.au/Hilux-3L-engine- ... 3361b174aa

http://cgi.ebay.com.au/TOYOTA-HILUX-2-8 ... 20b20db586

Or this one which doesn't have the pistons but do i really need new pistons

http://cgi.ebay.com.au/TOYOTA-HILUX-HIA ... 5ada9fd7da
Last edited by davenmarcia on Fri Nov 05, 2010 5:48 pm, edited 1 time in total.
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Re: Ebay engine rebuild kit for a 3l 2.8d hilux

Post by dans-paj92 »

If it aint broke, don't go fixing it!
Use the money for something else, does it use oil?
make a ticking noise?
Lack power?
Have bad blowby or low compression?
Also if you wanted to go oversize, you have to send the block away to get bored out as they have no linings.
If its just glazed cylinders, hone and re-ring it then.
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Re: Ebay engine rebuild kit for a 3l 2.8d hilux

Post by dans-paj92 »

Also they would had been chinese kits.
Call SMS diesel at lidcombe, they sell japanese kits which are basically genuine and also chinese ones, are cheaper than those on ebay as well.
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Posts: 105
Joined: Sat Aug 25, 2007 10:19 pm
Location: newcastle

Re: Ebay engine rebuild kit for a 3l 2.8d hilux

Post by davenmarcia »

Hi all
the engine did run fine and no obvious noises seemed to have normal power. However it does have an oil leak down the passenger side under the intake manifold so figured to fix that up i will pull half the motor apart and may aswell do a rebuild. but will let my mate check it out first before the big decision.

dave
Posts: 105
Joined: Sat Aug 25, 2007 10:19 pm
Location: newcastle

Re: Ebay engine rebuild kit for a 3l 2.8d hilux (now with pi

Post by davenmarcia »

some pics of engine

where is the oil leak from?
and how do i fix it

Image

Image

Image
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Re: Ebay engine rebuild kit for a 3l 2.8d hilux (now with pi

Post by dans-paj92 »

front leak is the timing cover gasket.
Rear leak may be manifold gasket, due to blowby?
Or leaking head gasket?
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Posts: 105
Joined: Sat Aug 25, 2007 10:19 pm
Location: newcastle

Re: Ebay engine rebuild kit for a 3l 2.8d hilux (now with pi

Post by davenmarcia »

Had a friend have a look and first thing he spotted was a missing bolt from the inlet manifold ( how blind am I ) and this combined with a bit of blowby is creating the leak. He suggests to either rebuild or just do a gasket kit. So it looks like I will be getting to know the 3l internals very closely.......... He also says to buy the parts thru him.


dave
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests