Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
jimny wide vs. jimny
jimny wide vs. jimny
What is the width difference on the wide and narrow jimny? Is it possible to fit rims and tires so they do not stick out past the body?
I want a narrow jimny but I will have to strip the plastic off a wide. And where there a LHD JB23W (660) ? that is what I really want
I want this
to this
I want a narrow jimny but I will have to strip the plastic off a wide. And where there a LHD JB23W (660) ? that is what I really want
I want this
to this
Last edited by ShuDuck on Mon Nov 01, 2010 4:31 pm, edited 1 time in total.
413TT
413K
413K
Re: jimny wide vs. jimny
The difference will be in the width of the axle housing, not rims. similar to the sierra/samura/sj410/whatever they are in norway, widetrack and narrow track.
You may be able to find rims off a vitara/escudo/sidekick with a minimal offset, and put them on, but you may run into other issues such as hitting the steering arms on the knuckles.
Also once you take of the wide jimny flares, there will be square holes in the guards from clips holding the flares on. You may not like the look of holes in the guards.
We have RHD wide 1.3 jimnys Only.
You may be able to find rims off a vitara/escudo/sidekick with a minimal offset, and put them on, but you may run into other issues such as hitting the steering arms on the knuckles.
Also once you take of the wide jimny flares, there will be square holes in the guards from clips holding the flares on. You may not like the look of holes in the guards.
We have RHD wide 1.3 jimnys Only.
I am Tim
Re: jimny wide vs. jimny
Thanks, so the control arms are placed similar on both models unlike the NT and WT sierra ? You know how much the axle difference is? Maybe a set of samurai axles would do the trick
Square holes I can just weld up, so no problem. But it seems like the NT jimny have som plastic around the wheel arches, and that might be hard to get. maybe I can just import one from japan and convert it to LHD
Square holes I can just weld up, so no problem. But it seems like the NT jimny have som plastic around the wheel arches, and that might be hard to get. maybe I can just import one from japan and convert it to LHD
413TT
413K
413K
Re: jimny wide vs. jimny
do have to convert it to lhd to drive it in norway !!!??
Re: jimny wide vs. jimny
get the jimny as wide as possible, then use store-bought rubber flaring like this to cover the wheels:
its called "flexy flare" here.
its called "flexy flare" here.
The worst thing about censorship is ███████.
Re: jimny wide vs. jimny
Seems like I cant get it registered. car must have a Certificate of Conformity in europe to get it registered as a RHD, one imported from japan(cars not for the european marked) I cant get register it seems. guess i have to import one and build on a norwegian chassis etc. and install engine(660) ++, that I MIGHT get licensed. pfh, stupid lawsyano wrote:do have to convert it to lhd to drive it in norway !!!??
I want it as narrow as possiblealien wrote:get the jimny as wide as possible, then use store-bought rubber flaring like this to cover the wheels:
its called "flexy flare" here.
413TT
413K
413K
Re: jimny wide vs. jimny
Cause it will be a DD, and I love the jap look. got older models to widen
413TT
413K
413K
Who is online
Users browsing this forum: No registered users and 6 guests