Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

leaf spring swap on a 47 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1
Joined: Tue Dec 08, 2009 4:31 pm
Location: birnam

leaf spring swap on a 47 series

Post by towy47 »

G'day all, Is there anybody out there who can tell me if i am able to put a set of 60 series rear leaf packs on the front and the rear, as they are supposed to be longer and i have extended shackles that i believe are standing too straight causing a bit of a rough ride. ( not that they are comfy anyway) my vehicle is a 1983 hj47 ute. Thanks
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Re: leaf spring swap on a 47 series

Post by Ricko »

I think an easier and better swap might be 75 series springs. The utes have longer springs than shorties in the rear and 75 rear springs are longer than 60 rears. Measure some up and see what you reckon. You will move your front diff forward a couple of inches which will need addressing with a spacer or lengthened shaft, not sure where the rear diff will end up. Personally I would look at flipping the rears which would improve departure.
Bambrick Media - www.bambrickmedia.com.au
Redlands 4WD Centre - www.redlands4wd.com.au
Swan's Water & Tipper Hire - 0414 628 011
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: leaf spring swap on a 47 series

Post by WICKED »

Ricko wrote:I think an easier and better swap might be 75 series springs. The utes have longer springs than shorties in the rear and 75 rear springs are longer than 60 rears. Measure some up and see what you reckon. You will move your front diff forward a couple of inches which will need addressing with a spacer or lengthened shaft, not sure where the rear diff will end up. Personally I would look at flipping the rears which would improve departure.

The rear leaves will be about 8-10 past the cab on a shorty. I had 75's spring's front and rear in my 40 shorty, rear's had too be shortened and rerolled, rear hang was flipped and had longer shackles

Image
Image
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Re: leaf spring swap on a 47 series

Post by Ricko »

They're going on a 47 ute so the extra length should be ok as the utes have longer rears than shorties don't they?
Bambrick Media - www.bambrickmedia.com.au
Redlands 4WD Centre - www.redlands4wd.com.au
Swan's Water & Tipper Hire - 0414 628 011
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: leaf spring swap on a 47 series

Post by WICKED »

Ricko wrote:They're going on a 47 ute so the extra length should be ok as the utes have longer rears than shorties don't they?

Yer they do but not 8-10inchs :shock: The shackle will get caught rotation pass the chassis won't it?
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Re: leaf spring swap on a 47 series

Post by Ricko »

I have 75 rears at home and they are about 100mm longer than my 60 rears from memory. It would be worth a look. The other thing is on a ute it would be pretty easy to move the mount back a bit to accomdate them if you had to.
Bambrick Media - www.bambrickmedia.com.au
Redlands 4WD Centre - www.redlands4wd.com.au
Swan's Water & Tipper Hire - 0414 628 011
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: leaf spring swap on a 47 series

Post by WICKED »

Ricko wrote:I have 75 rears at home and they are about 100mm longer than my 60 rears from memory. It would be worth a look. The other thing is on a ute it would be pretty easy to move the mount back a bit to accomdate them if you had to.

I thought they where longer but your right, A ute would be different to a shorty.

Pics towy47
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests