Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

new toy

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 16
Joined: Tue Oct 07, 2003 2:12 pm
Location: newcastle

new toy

Post by BLACK ZOOK »

hello people have just purchased another project was interested in your advice / opinions on suspension set ups.
Am building it for hardcore and comps dont want spoa sorry :oops:
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

nice tires :D

SOA :finger:

edit: that an Overkill Rear Bar?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Re: new toy

Post by OVERKILL ENG »

BLACK ZOOK wrote:hello people have just purchased another project was interested in your advice / opinions on suspension set ups.
Am building it for hardcore and comps dont want spoa sorry :oops:



Spua SUCKS go Spoa :D :D
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

Love those tail lights
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Re: new toy

Post by bigsteve »

OVERKILL ENGINEERING wrote:
BLACK ZOOK wrote:hello people have just purchased another project was interested in your advice / opinions on suspension set ups.
Am building it for hardcore and comps dont want spoa sorry :oops:



Spua SUCKS go Spoa :D :D
SAM


Yes and also paint it pink and build an exo so you can carry ladders and pieces of pipe around.

(One day I hope we will get sick of SPUA & SPOA Bashing and focus on Kia's)
yeshemesh
Posts: 1781
Joined: Fri Jan 17, 2003 6:44 pm
Location: Central Coast NSW

Re: new toy

Post by Midget »

BLACK ZOOK wrote:hello people have just purchased another project was interested in your advice / opinions on suspension set ups.
Am building it for hardcore and comps dont want spoa sorry :oops:


Blackzook
Mate all i would do is put a 2-3" spring lift,a 2" body lift,lockers F & R and a decent set of tyres.Oh and definatley get a full roll cage...
And if you want a bit more wheel travel,look at the climax shackles.
If ya need any help,just give me a call.

Regards
Jamie
The 4x4 Specialist
0414 807 899
Team 4x4 Specialist 005
Proudly Sponsorsed By
WWW.MAXXIS.COM
WWW.STAUNPRODUCTS.COM
COUNTRY WIDE MECHANICAL
Thanks to
WWW.OPW.COM.AU
WWW.DOBBINENGINEERING.COM
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

:cool:
Posts: 16
Joined: Tue Oct 07, 2003 2:12 pm
Location: newcastle

Post by BLACK ZOOK »

yes red zook they are nice tyres thankyou
sam as i said other day not interested in spoa but pics posted of your
trip up this way have increased my interest in coils
would love to paint it pink and fit exo but unfortunately cant afford the ladders
sorry jamie I'm not a fan of the climax shackle
would love a set of air lockers at the right price though :)
red zook history of the rear bar is top secret !!
don'y know if your comment about taillights contains sarcasm suzuki
viagra but they are pretty sexy for $22 each and about 1 hour to fit
Posts: 125
Joined: Sun Nov 23, 2003 4:54 am
Location: Seattle, Washington

Post by mtzook »

Not bad flex for stock...

I reckon if you're gunna keep is spring under, set up full exo cage, and do some major underbody protection (skid plates, front and rear sliders). Dual lockers with good gripping tires will get you all over the place, and you can just slide or roll over anything you can't really drive over.

Can you do the jeep leaf spring conversion while staying spring under?? Does anyone know? That would give more flex...

Winches at least front, maybe rear also, will be the only way to survive competitions without big lift and tires... Can't go too hardcore without making the truck hardcore first...

BTW, i think the taillights are cool. Out of the way, hard to break. Are they LED?
My tires were rubbing in the front, so I trimmed the hood, and now they're fine...
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

Cool looking chariot. Where in N'castle are ya based?

And more importantly, where do ya get those lights for $22 bucks?
- Drewfus Designs -

"Build it small, DRIVE it big..."
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Drewfus wrote:And more importantly, where do ya get those lights for $22 bucks?


I want those lights too :)
DMA Founding Member #1 - Now Retired
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

have a look at big steves, greg or my setup for rear leaves all round, guard trimming and 34" swampers with a Series 3 rockhopper and lockers. Good low capapble cars for not much $$$$ if done right the first time. And also where did you get the lights from?
Ransom note = demand + collage
Posts: 16
Joined: Tue Oct 07, 2003 2:12 pm
Location: newcastle

Post by BLACK ZOOK »

competed in spua zook with dual lockers for a couple of years then decided to have a break but am now getting back into it i believe you can go hardcore without massive lift and huge tyres - as long as you have the big balls - my old zook drove Porters , Freds Hill , and competition with only 31" muddies




THE LIGHTS
Should i give up my relative individuality????

No they are not LED

Sealed beam rubber mounted
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

individuality........mmm.

A novel concept.

Looks good regardless.
- Drewfus Designs -

"Build it small, DRIVE it big..."
Posts: 125
Joined: Sun Nov 23, 2003 4:54 am
Location: Seattle, Washington

Post by mtzook »

I believe Narva sells flat mounted round lights like those, but LED's. I had a look thru their full catalog a few years back and they had just started selling them for semi-trailers. They were selling them to replace the old dull-looking ones....

How did you "rubber mount" them??? They kinda look "metal-mounted" in the pic.
My tires were rubbing in the front, so I trimmed the hood, and now they're fine...
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

No sarcasm... like them a lot.....

Remind me of Skyline taillights or Corvette tail lights a bit.

not much good on the Viagra with the taillights well out of the way btu a good idea on a Sierra for sure.
Posts: 16
Joined: Tue Oct 07, 2003 2:12 pm
Location: newcastle

Post by BLACK ZOOK »

the lights are narva and they are sealed they come with wires and rubber
mounting gromet thingy just have to ask for mounting hole diameter

Amber part # 94002 cost $20.60 each

Stop / tail part # 94008 cost $18.03 each

Reverse part # 94018 cost $20.00 each ( not used )

Purchased from North Star Motors at Heatherbrae ph. 49831433
Their prices on lightforce seem reasonable also.
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

Cool & thanks, drive past there each day driving to work, will chase some up.
- Drewfus Designs -

"Build it small, DRIVE it big..."
Posts: 208
Joined: Fri Jan 24, 2003 4:00 pm
Location: Newcastle, nsw

Post by zukin »

that looks very familiar if its the one im thinking of you got it from tonys autos maybe thats who my mate sold it to a few months back. before that another one of my mates had it. pretty capable truck as it was body lift a backyard job alittle dodgy and 3 inch spring lift.
its a good truck.
Ya here for a good time not a long time!
Posts: 16
Joined: Tue Oct 07, 2003 2:12 pm
Location: newcastle

Post by BLACK ZOOK »

yeah picked it up from the chop shop - got heaps of cutting and mods to do so didnt want to outlay to much $$
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest