Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
new toy
new toy
hello people have just purchased another project was interested in your advice / opinions on suspension set ups.
Am building it for hardcore and comps dont want spoa sorry
Am building it for hardcore and comps dont want spoa sorry
Re: new toy
BLACK ZOOK wrote:hello people have just purchased another project was interested in your advice / opinions on suspension set ups.
Am building it for hardcore and comps dont want spoa sorry
Spua SUCKS go Spoa
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
www.overkill4x4.com
Re: new toy
OVERKILL ENGINEERING wrote:BLACK ZOOK wrote:hello people have just purchased another project was interested in your advice / opinions on suspension set ups.
Am building it for hardcore and comps dont want spoa sorry
Spua SUCKS go Spoa
SAM
Yes and also paint it pink and build an exo so you can carry ladders and pieces of pipe around.
(One day I hope we will get sick of SPUA & SPOA Bashing and focus on Kia's)
yeshemesh
Re: new toy
BLACK ZOOK wrote:hello people have just purchased another project was interested in your advice / opinions on suspension set ups.
Am building it for hardcore and comps dont want spoa sorry
Blackzook
Mate all i would do is put a 2-3" spring lift,a 2" body lift,lockers F & R and a decent set of tyres.Oh and definatley get a full roll cage...
And if you want a bit more wheel travel,look at the climax shackles.
If ya need any help,just give me a call.
Regards
Jamie
The 4x4 Specialist
0414 807 899
Team 4x4 Specialist 005
Proudly Sponsorsed By
WWW.MAXXIS.COM
WWW.STAUNPRODUCTS.COM
COUNTRY WIDE MECHANICAL
Thanks to
WWW.OPW.COM.AU
WWW.DOBBINENGINEERING.COM
Proudly Sponsorsed By
WWW.MAXXIS.COM
WWW.STAUNPRODUCTS.COM
COUNTRY WIDE MECHANICAL
Thanks to
WWW.OPW.COM.AU
WWW.DOBBINENGINEERING.COM
yes red zook they are nice tyres thankyou
sam as i said other day not interested in spoa but pics posted of your
trip up this way have increased my interest in coils
would love to paint it pink and fit exo but unfortunately cant afford the ladders
sorry jamie I'm not a fan of the climax shackle
would love a set of air lockers at the right price though
red zook history of the rear bar is top secret !!
don'y know if your comment about taillights contains sarcasm suzuki
viagra but they are pretty sexy for $22 each and about 1 hour to fit
sam as i said other day not interested in spoa but pics posted of your
trip up this way have increased my interest in coils
would love to paint it pink and fit exo but unfortunately cant afford the ladders
sorry jamie I'm not a fan of the climax shackle
would love a set of air lockers at the right price though
red zook history of the rear bar is top secret !!
don'y know if your comment about taillights contains sarcasm suzuki
viagra but they are pretty sexy for $22 each and about 1 hour to fit
Not bad flex for stock...
I reckon if you're gunna keep is spring under, set up full exo cage, and do some major underbody protection (skid plates, front and rear sliders). Dual lockers with good gripping tires will get you all over the place, and you can just slide or roll over anything you can't really drive over.
Can you do the jeep leaf spring conversion while staying spring under?? Does anyone know? That would give more flex...
Winches at least front, maybe rear also, will be the only way to survive competitions without big lift and tires... Can't go too hardcore without making the truck hardcore first...
BTW, i think the taillights are cool. Out of the way, hard to break. Are they LED?
I reckon if you're gunna keep is spring under, set up full exo cage, and do some major underbody protection (skid plates, front and rear sliders). Dual lockers with good gripping tires will get you all over the place, and you can just slide or roll over anything you can't really drive over.
Can you do the jeep leaf spring conversion while staying spring under?? Does anyone know? That would give more flex...
Winches at least front, maybe rear also, will be the only way to survive competitions without big lift and tires... Can't go too hardcore without making the truck hardcore first...
BTW, i think the taillights are cool. Out of the way, hard to break. Are they LED?
My tires were rubbing in the front, so I trimmed the hood, and now they're fine...
competed in spua zook with dual lockers for a couple of years then decided to have a break but am now getting back into it i believe you can go hardcore without massive lift and huge tyres - as long as you have the big balls - my old zook drove Porters , Freds Hill , and competition with only 31" muddies
THE LIGHTS
Should i give up my relative individuality????
No they are not LED
Sealed beam rubber mounted
THE LIGHTS
Should i give up my relative individuality????
No they are not LED
Sealed beam rubber mounted
I believe Narva sells flat mounted round lights like those, but LED's. I had a look thru their full catalog a few years back and they had just started selling them for semi-trailers. They were selling them to replace the old dull-looking ones....
How did you "rubber mount" them??? They kinda look "metal-mounted" in the pic.
How did you "rubber mount" them??? They kinda look "metal-mounted" in the pic.
My tires were rubbing in the front, so I trimmed the hood, and now they're fine...
the lights are narva and they are sealed they come with wires and rubber
mounting gromet thingy just have to ask for mounting hole diameter
Amber part # 94002 cost $20.60 each
Stop / tail part # 94008 cost $18.03 each
Reverse part # 94018 cost $20.00 each ( not used )
Purchased from North Star Motors at Heatherbrae ph. 49831433
Their prices on lightforce seem reasonable also.
mounting gromet thingy just have to ask for mounting hole diameter
Amber part # 94002 cost $20.60 each
Stop / tail part # 94008 cost $18.03 each
Reverse part # 94018 cost $20.00 each ( not used )
Purchased from North Star Motors at Heatherbrae ph. 49831433
Their prices on lightforce seem reasonable also.
that looks very familiar if its the one im thinking of you got it from tonys autos maybe thats who my mate sold it to a few months back. before that another one of my mates had it. pretty capable truck as it was body lift a backyard job alittle dodgy and 3 inch spring lift.
its a good truck.
its a good truck.
Ya here for a good time not a long time!
Who is online
Users browsing this forum: No registered users and 0 guests