Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
show me your wheels/rims as im about to go buy some.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
show me your wheels/rims as im about to go buy some.
On my 1979 FJ45 ute i am going to upgrade the rubber and rims. I know roughly what i want but i do have a frew decisions to make.
The look that i am going for is something like this....
As far as rubber goes i am quite confident i want either Maxis Bighorns or Mickey Thompson baja claw radial. Bighorns being quite alot cheaper so i will most likely head in that direction. If you know another choice than please feel free to give me your recommendations as i will be doing an equal amount of road,sand & mud driving but at no cost do i want to sacrifice any performance on the dirt but will deal with slight road noise to achieve it.
here is the Mickey Thompson claw radial.
and the Maxxis Bighorn radials
As far as rims go im still undecided but i have narrowed it down to a few that have this style with drilled holes. My BIG QUESTION is should i go for a 15 or 16 inch rim as some of these rims are only available in one or the other . I Decided on a 8 inch wide rim as my research tells me a 32inch tall tire will prob fit my cruiser the best but once again if you know something i dont step in.
Its either outlaw 2
baja
Allied thunder
allied 20
or Allied competition beadlocs in black
so show us what you have blokes that works keeping in mind after this i will be tackling a 4 wheel disc brake conversion. Thanks all.
The look that i am going for is something like this....
As far as rubber goes i am quite confident i want either Maxis Bighorns or Mickey Thompson baja claw radial. Bighorns being quite alot cheaper so i will most likely head in that direction. If you know another choice than please feel free to give me your recommendations as i will be doing an equal amount of road,sand & mud driving but at no cost do i want to sacrifice any performance on the dirt but will deal with slight road noise to achieve it.
here is the Mickey Thompson claw radial.
and the Maxxis Bighorn radials
As far as rims go im still undecided but i have narrowed it down to a few that have this style with drilled holes. My BIG QUESTION is should i go for a 15 or 16 inch rim as some of these rims are only available in one or the other . I Decided on a 8 inch wide rim as my research tells me a 32inch tall tire will prob fit my cruiser the best but once again if you know something i dont step in.
Its either outlaw 2
baja
Allied thunder
allied 20
or Allied competition beadlocs in black
so show us what you have blokes that works keeping in mind after this i will be tackling a 4 wheel disc brake conversion. Thanks all.
Last edited by gingerbreadman on Wed Nov 03, 2010 7:54 pm, edited 2 times in total.
Re: show me your wheels/rims as im about to go buy some.
if you are going to do 4w disks then go for 16" rims just gives that little bit extra room for calipers.
the only good looking rims you have pictured there is the ones with the claws on them or the steelies . if your only going 15x8 make sure you get the max offset you can (-22 i think )just for more caliper room on the rear and tierod end clearence on the front .
the only good looking rims you have pictured there is the ones with the claws on them or the steelies . if your only going 15x8 make sure you get the max offset you can (-22 i think )just for more caliper room on the rear and tierod end clearence on the front .
88vx 60's sahara twin factory locked on 37's
Re: show me your wheels/rims as im about to go buy some.
I'm pretty sure they are Mickey Thompson CLASSIC LOCKWALKS wrote:the only good looking rims you have pictured there is the ones with the claws on them
Re: show me your wheels/rims as im about to go buy some.
Aussie, these are MT classic locs but im not interested in them as the bead loc is just for show . Im only interested in rims with either no bead loc or at least rims that have a functional loc.Aussie Outlaw wrote:I'm pretty sure they are Mickey Thompson CLASSIC LOCKWALKS wrote:the only good looking rims you have pictured there is the ones with the claws on them
Last edited by gingerbreadman on Wed Nov 03, 2010 7:57 pm, edited 1 time in total.
Re: show me your wheels/rims as im about to go buy some.
thats what i ment , the rest just look like cheap copies . i also like my procomp wheels 1059 i think.
88vx 60's sahara twin factory locked on 37's
Re: show me your wheels/rims as im about to go buy some.
whats sort of ballpark prices are good looking aftermarket alloys worth? like those pictured?
ive always just bought max offset steel sunnies. a: cause im a tightass b: when i bend them on trail i can just bash them straight(ish) to keep air
but i do like the looks of the alloy
ive always just bought max offset steel sunnies. a: cause im a tightass b: when i bend them on trail i can just bash them straight(ish) to keep air
but i do like the looks of the alloy
Re: show me your wheels/rims as im about to go buy some.
i know what your saying Sideways ..I totally agree. if i was a hardcore rock crawler or something i would certainly not bother with the bling but my 4x4 is just for the bush trails so i can get to my favourite fishing spots. I need to get through a few swamps and creek crossings so i wont be busting up any wheels or undercarriage
the wheel and tire combos that i have posted depending on the combinations are roughly between $2000-$2500 here in bris but ill be shopping in the states Where most of these alloy wheels in the pics are between $120-150US so a massive saving. I have a good contact who runs containers so the final price may not be too bad.
the wheel and tire combos that i have posted depending on the combinations are roughly between $2000-$2500 here in bris but ill be shopping in the states Where most of these alloy wheels in the pics are between $120-150US so a massive saving. I have a good contact who runs containers so the final price may not be too bad.
Re: show me your wheels/rims as im about to go buy some.
Walks your pro comp wheels look very nice and thats something i would definatly go for .
Re: show me your wheels/rims as im about to go buy some.
gingerbreadman wrote:Aussie, these are MT classic locs but im not interested in them as the bead loc is just for show . Im only interested in rims with either no bead loc or at least rims that have a functional loc.Aussie Outlaw wrote:I'm pretty sure they are Mickey Thompson CLASSIC LOCKWALKS wrote:the only good looking rims you have pictured there is the ones with the claws on them
Pretty sure you can still get them with out the fake lock rim. They are just called MT Classic and look pretty good.
If ignorance is bliss, then why aren't there more happy teenagers?
Re: show me your wheels/rims as im about to go buy some.
Go the Evan Walker rims.
Not sure how to put up pics but a mate just bought some with 37" Km2's and they look unreal.
Not sure how to put up pics but a mate just bought some with 37" Km2's and they look unreal.
Re: show me your wheels/rims as im about to go buy some.
AHF01U wrote:Go the Evan Walker rims.
Not sure how to put up pics but a mate just bought some with 37" Km2's and they look unreal.
In black??
I'm just raising my post count
I hate emoticons :grab:
I hate emoticons :grab:
Who is online
Users browsing this forum: No registered users and 165 guests