Hey fellas,
Is it possible to increase the oil level in an air shock so it can hydro lock itself b4 bottoming out? While still maintaining a decent air/oil ratio?
Shock in question - 12" redback airshock
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Air shock - bump stop
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Air shock - bump stop
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Re: Air shock - bump stop
You can with Fox airshocks.
That's how the rears are in my buggy.
More oil and less Nitrogen makes them softer at ride also, but more progressive ramping.
Should relate directly to the redbacks.
Dan
That's how the rears are in my buggy.
More oil and less Nitrogen makes them softer at ride also, but more progressive ramping.
Should relate directly to the redbacks.
Dan
Re: Air shock - bump stop
Alright well i have increased the oil level a bit till it hydraluics with 5mm of shaft left sticking out.
Obviously i do still intend on running another bumpstop but hopefully untill i get that dialed in correctly this will save my shocks somewhat.
Obviously i do still intend on running another bumpstop but hopefully untill i get that dialed in correctly this will save my shocks somewhat.
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Who is online
Users browsing this forum: No registered users and 2 guests