I just got one of these from work. Seems in good nick. Are these winches any good? Can they go on a GU Patrol?
Cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Series 6 Pto Warn Winch.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Series 6 Pto Warn Winch.
So Many Cats,So few Recipies
Re: Series 6 Pto Warn Winch.
post up some pics. Are they pto or hyd? they carnt be to bad being made by warn
Serg
Serg
Re: Series 6 Pto Warn Winch.
It might actually be hydraulic. I will get some photos up this arvo.
So Many Cats,So few Recipies
Re: Series 6 Pto Warn Winch.
It sounds like a Warn Series 6 Hydraulic Winch with a capacity of 6000lbs (2720kg).
I would suggest it is too small for a GU Patrol.
If you were to use it, it could be run off your powersteering pump (aka milemarker -although due to the gearing it would be 4.3x slower than even a milemarker - which is already slow), custom engine driven clutched hyd pump or if your GU has a PTO output, from your gearbox.
To run dedicated hydraulic would also req a custom reservoir, spool/counterbalance valves etc, piping etc.
Check:
http://www.warn.com/industrial/winches/ ... ulic.shtml
Regards,
Dan
I would suggest it is too small for a GU Patrol.
If you were to use it, it could be run off your powersteering pump (aka milemarker -although due to the gearing it would be 4.3x slower than even a milemarker - which is already slow), custom engine driven clutched hyd pump or if your GU has a PTO output, from your gearbox.
To run dedicated hydraulic would also req a custom reservoir, spool/counterbalance valves etc, piping etc.
Check:
http://www.warn.com/industrial/winches/ ... ulic.shtml
Regards,
Dan
1HD-FT SWB 70 Series
Who is online
Users browsing this forum: No registered users and 111 guests