Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1FZFE rear main

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

1FZFE rear main

Post by Willy Hilux »

Any body know the size of the rear main for a 4.5l petrol landcruiser 1FZFE?

Toyota want $91 for a seal. Nearly fell over when they told me this. But everone has said go toyota seals, as they are better.

Any info would be good. Cheers
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
drr
Posts: 165
Joined: Tue Aug 31, 2010 8:19 am

Re: 1FZFE rear main

Post by drr »

Make sure it's leaking from the seal and not the sump. You need the gearbox, flywheel and backing plate off to do this though, which makes it a PITA. Most leaks at the back are from the sump gasket (sealant). As for size I have no idea, but if it is leaking, go the Toyota seal.
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Re: 1FZFE rear main

Post by Willy Hilux »

Cheers, Getting the clutch replaced. So will get the mechanic to check over everything. Will replace the rear main while he is in there. Will also get him to check sump geasket. Anything else that might cause a leak between motor and gearox (motor oil) ??
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
drr
Posts: 165
Joined: Tue Aug 31, 2010 8:19 am

Re: 1FZFE rear main

Post by drr »

Nah, not much else in there.
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Re: 1FZFE rear main

Post by dow50r »

you can buy the seal from ses bearings for $50
Confucious say...man who argue with idiot, worserer himself
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest