Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cruiser gearboxes

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
User avatar
doe
Posts: 119
Joined: Sun Jul 12, 2009 6:41 pm
Location: brisbane

Cruiser gearboxes

Post by doe »

Gday guys this may have been covered before want too know what the numbers after the h55f code mean. I have too 75 series utes one is a 1985model other is a 1995model. Question is 85mod has a h55f ko82 gearbox 95mod has a h55f ko85 gearbox what does the ko number refer too are they two differnt boxes? Been haveing trouble with the search every time I open a page too read when I try too go back I lose the search page.

The 85 is a petrol the 95 is a diesel.

Cheers Scott
Posts: 96
Joined: Tue Nov 10, 2009 10:43 am
Location: brisbane

Re: Cruiser gearboxes

Post by stan »

not sure but ko82 means 4.1 ratio open rear diff centre and ko85 means 4.1 lsd rear diff ,can anyone correct me.
User avatar
doe
Posts: 119
Joined: Sun Jul 12, 2009 6:41 pm
Location: brisbane

Re: Cruiser gearboxes

Post by doe »

Thanks Stan that makes sense I think it has gearbox/axle code on compliance plate now I think about it. So do you know if they are the same gearbox from petrol too diesel same ratios and the like?

Cheers Scott.
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Re: Cruiser gearboxes

Post by vk7ybi »

Same. Only exception is the 4 cylinder diesel has a longer input shaft and clutch housing.
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: Cruiser gearboxes

Post by hulsty »

Gearboxes are different in many ways, geaxbox ratios are the same, transfer I am not sure. Main differences between your 85 petrol box and your 95 diesel is the input shafts are different, bell housing and depending on when in 85 the petrol box was built it might have the smaller 34mm idler shaft, the later 95 box will be a 38mm idler.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
User avatar
doe
Posts: 119
Joined: Sun Jul 12, 2009 6:41 pm
Location: brisbane

Re: Cruiser gearboxes

Post by doe »

Thanks guys thought the input shafts may have been different was thinking of pulling 85 box out and rebuilding it to put into the 95 but if I have too change shafts need both out at same time. Be easyer too just rebuild 95mod box.

Cheers Scott.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests