Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bending a slightly warped door back into shape

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 817
Joined: Fri Jun 17, 2005 9:23 pm
Location: Sydney

Bending a slightly warped door back into shape

Post by TheOtherLeft »

I'm having a problem with a slightly warped door. It's the one-piece back door on my Suzuki. It now leaks a little in the rain when once it didn't. The seal looks OK, I think the door just isn't pressing onto the seal enough.

I had the same problem with the passenger door when the car was at the smash repairer and the door was left open for days on end. It resulted in the top of the door sagging and not touching the frame to the extent you see daylight between the door and seal. The smash repairer said they just bent it back to fix it.

Is there a technique for bending the door back to be square or is it just brute force?
Posts: 85
Joined: Fri Jan 15, 2010 4:50 pm
Location: vic

Re: Bending a slightly warped door back into shape

Post by deano86 »

try adjusting the catch or the hinges and if still no joy u can just bend it with brute force but be careful windows break when this hapens
white gq wagon with some stuff here and there
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Re: Bending a slightly warped door back into shape

Post by alien »

sierra rear doors usually sag at the hinges... its probably better you take the hinges off and tighten them up.
The worst thing about censorship is ███████.
Posts: 151
Joined: Tue Aug 07, 2007 5:47 pm
Location: Grandchester Yo!

Re: Bending a slightly warped door back into shape

Post by stitch_all4x4 »

If its off a zook throw it away it's fawked :finger:
Striping - y60 Ute Cab,most parts available,h260 rear diff,4.2 5speed/transfer etc Pm Me
Posts: 817
Joined: Fri Jun 17, 2005 9:23 pm
Location: Sydney

Re: Bending a slightly warped door back into shape

Post by TheOtherLeft »

deano86 wrote:try adjusting the catch or the hinges and if still no joy u can just bend it with brute force but be careful windows break when this hapens
Hinges look tight and the catch works fine.
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: Bending a slightly warped door back into shape

Post by BlueSuzy »

By rear was bent and warped.

I just twisted it by hand..One hand top, one bottom, and twist!


If all fails. i have another here..$ :D



EDIT. What suzuki??
I am Tim
Posts: 817
Joined: Fri Jun 17, 2005 9:23 pm
Location: Sydney

Re: Bending a slightly warped door back into shape

Post by TheOtherLeft »

BlueSuzy wrote:By rear was bent and warped.

I just twisted it by hand..One hand top, one bottom, and twist!


If all fails. i have another here..$ :D



EDIT. What suzuki??
Yeah i tried the one hand on top, one hand in the middle and my knee at the bottom, and twist. I was wondering if there's a less brutal way of doing it.

it's a Grand Vitara with the one-piece door.
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: Bending a slightly warped door back into shape

Post by BlueSuzy »

TheOtherLeft wrote:
BlueSuzy wrote:By rear was bent and warped.

I just twisted it by hand..One hand top, one bottom, and twist!


If all fails. i have another here..$ :D



EDIT. What suzuki??
Yeah i tried the one hand on top, one hand in the middle and my knee at the bottom, and twist. I was wondering if there's a less brutal way of doing it.

it's a Grand Vitara with the one-piece door.
I was thinking sierra because of alien.. but you didnt say what car..

Sierra's are easy..
I am Tim
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests