Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bending a slightly warped door back into shape
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Bending a slightly warped door back into shape
I'm having a problem with a slightly warped door. It's the one-piece back door on my Suzuki. It now leaks a little in the rain when once it didn't. The seal looks OK, I think the door just isn't pressing onto the seal enough.
I had the same problem with the passenger door when the car was at the smash repairer and the door was left open for days on end. It resulted in the top of the door sagging and not touching the frame to the extent you see daylight between the door and seal. The smash repairer said they just bent it back to fix it.
Is there a technique for bending the door back to be square or is it just brute force?
I had the same problem with the passenger door when the car was at the smash repairer and the door was left open for days on end. It resulted in the top of the door sagging and not touching the frame to the extent you see daylight between the door and seal. The smash repairer said they just bent it back to fix it.
Is there a technique for bending the door back to be square or is it just brute force?
Re: Bending a slightly warped door back into shape
try adjusting the catch or the hinges and if still no joy u can just bend it with brute force but be careful windows break when this hapens
white gq wagon with some stuff here and there
Re: Bending a slightly warped door back into shape
sierra rear doors usually sag at the hinges... its probably better you take the hinges off and tighten them up.
The worst thing about censorship is ███████.
Re: Bending a slightly warped door back into shape
If its off a zook throw it away it's fawked
Striping - y60 Ute Cab,most parts available,h260 rear diff,4.2 5speed/transfer etc Pm Me
Re: Bending a slightly warped door back into shape
Hinges look tight and the catch works fine.deano86 wrote:try adjusting the catch or the hinges and if still no joy u can just bend it with brute force but be careful windows break when this hapens
Re: Bending a slightly warped door back into shape
By rear was bent and warped.
I just twisted it by hand..One hand top, one bottom, and twist!
If all fails. i have another here..$
EDIT. What suzuki??
I just twisted it by hand..One hand top, one bottom, and twist!
If all fails. i have another here..$
EDIT. What suzuki??
I am Tim
Re: Bending a slightly warped door back into shape
Yeah i tried the one hand on top, one hand in the middle and my knee at the bottom, and twist. I was wondering if there's a less brutal way of doing it.BlueSuzy wrote:By rear was bent and warped.
I just twisted it by hand..One hand top, one bottom, and twist!
If all fails. i have another here..$
EDIT. What suzuki??
it's a Grand Vitara with the one-piece door.
Re: Bending a slightly warped door back into shape
I was thinking sierra because of alien.. but you didnt say what car..TheOtherLeft wrote:Yeah i tried the one hand on top, one hand in the middle and my knee at the bottom, and twist. I was wondering if there's a less brutal way of doing it.BlueSuzy wrote:By rear was bent and warped.
I just twisted it by hand..One hand top, one bottom, and twist!
If all fails. i have another here..$
EDIT. What suzuki??
it's a Grand Vitara with the one-piece door.
Sierra's are easy..
I am Tim
Who is online
Users browsing this forum: No registered users and 0 guests