Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

are my valves shaggged?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

are my valves shaggged?

Post by pongo »

Its a Diesel and was doing my valve stem seals( have motor out anyway) and put 90psi of air into cylinders to hold valves, and noticed a heap of air escaping past the exhaust valve on 1 cylinder,

Then i tried another and that one was leaking but not as bad.

Im figuring the blown manifold gasket has done more damage than hoped for.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Re: are my valves shaggged?

Post by Struth »

Sounds like they could be burnt unfortunately, but try putting the springs back on the valves and see if air still gets through with a hundred or so pounds of spring holding the valve closed.
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Re: are my valves shaggged?

Post by pongo »

Struth wrote:Sounds like they could be burnt unfortunately, but try putting the springs back on the valves and see if air still gets through with a hundred or so pounds of spring holding the valve closed.

that was with the valve springs in place. :bad-words: :bad-words: :bad-words: :bad-words:

that head was xrayed and had a slight crack starting to appear. looks like ill have to send off my spare one for testing,etc

thanks
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 15 guests