I need some advice from the pro's on here about setting up the correct tension for my hubs on the 80 series. With a knuckle pull scale, what tension should they be for running 35" muddies. I have never known the correct tension to shim it and just guessed in the past. Making both sides the same.
Im getting older and wiser these days though and would like to know how to correctly shim and set them up. Any other advice would be great aswell. Thanks Mark
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series Swivel hub/knuckle pull scale tension
Moderators: toaddog, Elmo, DUDELUX
Re: 80 series Swivel hub/knuckle pull scale tension
Anywhere between 2.5 and 4.5kg of force after overcoming inertia.
In reality though, provided you don't mess up the shims there won't need to be any adjustment.
Some people do recommend you shim them up to help with wobbles on some tires, but I think that if you intend to drive on the highway, then run a decent mud tyre that is balanced properly. With a good tire, factory specs are fine on an 80 series
In reality though, provided you don't mess up the shims there won't need to be any adjustment.
Some people do recommend you shim them up to help with wobbles on some tires, but I think that if you intend to drive on the highway, then run a decent mud tyre that is balanced properly. With a good tire, factory specs are fine on an 80 series
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Resident Terrorist
Re: 80 series Swivel hub/knuckle pull scale tension
I usually aim for 8 to 10 pounds of pull until the hub starts moving.
Re: 80 series Swivel hub/knuckle pull scale tension
RAY185 wrote:I usually aim for 8 to 10 pounds of pull until the hub starts moving.
How can anyone take that seriously with that avatar?
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Re: 80 series Swivel hub/knuckle pull scale tension
I tension my upto 60 nm. Been working great I do my once a year
Who is online
Users browsing this forum: No registered users and 92 guests