Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rolled GU ute
Rolled GU ute
Hi everybody, hope the new year is treating you well.
The weekend before christmas i rolled my TD42T GU Coil Ute.
The insurance company has declared it a repairable write-off. The cab is beyond repair & i'm unsure about the chassis.
The engine and drive line and suspension all appear to be fine.
i would like to transplant all the good parts into another truck as i have:
6" snake lift kit
F&R arb air lockers
4.88 diff ratios
86% crawler gears
as well as bull bar spotlights and winch.
i was looking at a 3L or 2.8L at around $10,000 but im unsure as to how hard the engine and gearbox swap will be, i plan to do as much of the work myself as i can.
Any ideas info or sugestions are much appreciated.
The weekend before christmas i rolled my TD42T GU Coil Ute.
The insurance company has declared it a repairable write-off. The cab is beyond repair & i'm unsure about the chassis.
The engine and drive line and suspension all appear to be fine.
i would like to transplant all the good parts into another truck as i have:
6" snake lift kit
F&R arb air lockers
4.88 diff ratios
86% crawler gears
as well as bull bar spotlights and winch.
i was looking at a 3L or 2.8L at around $10,000 but im unsure as to how hard the engine and gearbox swap will be, i plan to do as much of the work myself as i can.
Any ideas info or sugestions are much appreciated.
Re: Rolled GU ute
better off buying a 2.8 and swapping the body onto the ute chassis as long as you didnt bend it when you rolled it.
saves swapping the lift, diff, winch, bull bar, motor and box.
the easiest patrol to do the 4.2 conversion would be the 4.5 as you dont have to modify or cut off chassis mounts and weld on the chassis engine mounts from the 4.2. plus if you get a manual 4.5 you can use the gearbox as a spare. 3l gearbox is also the same.
hope that helps, lozz
saves swapping the lift, diff, winch, bull bar, motor and box.
the easiest patrol to do the 4.2 conversion would be the 4.5 as you dont have to modify or cut off chassis mounts and weld on the chassis engine mounts from the 4.2. plus if you get a manual 4.5 you can use the gearbox as a spare. 3l gearbox is also the same.
hope that helps, lozz
Re: Rolled GU ute
wanna sell your front seats and console
Re: Rolled GU ute
So the insurance company deemed it a write off
So the car is now the insurance companies and you get the cheque for its write off value
OR
Did you buy the wreck back from the insurance company
So the car is now the insurance companies and you get the cheque for its write off value
OR
Did you buy the wreck back from the insurance company
Re: Rolled GU ute
Yeah that helps a lot lozz, I'd like to go with a whole new body and chassis as then it's no longer classed as a repaired write-off.
Are there any changes that need to be made to the fuel system when going from petrol to diesel? Apart from a good flush out?
I bought it back from the insurance company, for a hell of a lot less than the mods are worth
I'm glad they didn't know what they were looking at
Are there any changes that need to be made to the fuel system when going from petrol to diesel? Apart from a good flush out?
I bought it back from the insurance company, for a hell of a lot less than the mods are worth
I'm glad they didn't know what they were looking at
Re: Rolled GU ute
hey THOMO89
sorry mate, i have after market D1 bucket seats in my ute and no centre console.
sorry mate, i have after market D1 bucket seats in my ute and no centre console.
Re: Rolled GU ute
sent u a pm about the mirrors mainly the brackets that attach to the door willing to pay for them let me know
Cheers
Cheers
GIVE IT SOME S**T
my build http://www.outerlimits4x4.com/viewtopic.php?t=74420
my build http://www.outerlimits4x4.com/viewtopic.php?t=74420
Re: Rolled GU ute
The fuel lines are bigger on the diesel. I haven't worried about it on my Gu but since you have the lines all ready on the ute you should change the lines and the sender aswell as it might have a bigger pick up. In qld it takes ages to pass a repaired write off so going down that path would take longer aswell so it wouldn't be worth it in the first place.
Lozz
Lozz
Re: Rolled GU ute
Thanks for the info guys, i have dedcided to cut my losses and get out of 4wding for the moment.
The Truck is for sale on Ebay, and as soon as i get a chance i will be puting it up in the clasifides page in this forum.
if it dosnt sell i will be striping it for parts, again ill be posting this up in the clasifides.
The Truck is for sale on Ebay, and as soon as i get a chance i will be puting it up in the clasifides page in this forum.
if it dosnt sell i will be striping it for parts, again ill be posting this up in the clasifides.
Re: Rolled GU ute
Sorry to hear about your ute mate, just checked it on eBay and
she was a real nice rig. Just wanted to warn you though, I rolled my gu ute a year ago and decided to cut my losses, worst mistake ever. Here I am a year down the track doing it all over again. Very expensive decision, should of known I couldn't stay away from 4wding. U have put alot of work into it and I would be looking at the idea of putting all your gear into a 3l wagon and then chopping it. Just my thoughts
she was a real nice rig. Just wanted to warn you though, I rolled my gu ute a year ago and decided to cut my losses, worst mistake ever. Here I am a year down the track doing it all over again. Very expensive decision, should of known I couldn't stay away from 4wding. U have put alot of work into it and I would be looking at the idea of putting all your gear into a 3l wagon and then chopping it. Just my thoughts
Team Pissed N Broke
WTC 2013
WTC 2013
Who is online
Users browsing this forum: No registered users and 2 guests