Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2nd hand highmount issues
Moderators: toaddog, TWISTY, V8Patrol, Moderators
2nd hand highmount issues
I recently rebuilt a 2nd hand highmount, replacing the bushes and seal for the drum, putting a new brake kit in it and a new clutch. Once i reassembled it, the drum has a lot of flex in the housing causing it to leak oil. My only idea is that the locking plate is warn alowing the drum to move in the housing. Any help would be geatly appreicated.
Re: 2nd hand highmount issues
They only take like 200-300mls of oil in the first place, so dont know if you have over filled it.
I seen a lot of highmounts with the same issues your describing, dont think its to much to worry about.
I seen a lot of highmounts with the same issues your describing, dont think its to much to worry about.
Re: 2nd hand highmount issues
Did you fit the new seal on to the drum itself (fits between drum and the nylon bush) it left out it will leak.
Re: 2nd hand highmount issues
Yes, new seal between the two bushes
Who is online
Users browsing this forum: No registered users and 1 guest