Fellows Im from the U.S. and own a small company called 4wheelunderground. I build link suspension systems for the earlier Toyota Mini trucks and 4runners. I was woundering if someone here could teach me a bit about the lift laws and vehicle requierments of street driven vehicles that also see considerable offroad use.
Thanks in advance
TacoRunner
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Lift laws
Moderators: toaddog, Elmo, DUDELUX
Lift laws
Link Suspension Systems for your 79-95 hilux or 4Runner.
http://www.4wheelunderground.com" onclick="window.open(this.href);return false;
THE BEATINGS WILL CONTINUE UNTIL MORALE IMPROVES
http://www.4wheelunderground.com" onclick="window.open(this.href);return false;
THE BEATINGS WILL CONTINUE UNTIL MORALE IMPROVES
Re: Lift laws
dont know about eleswhere, but legal height in qld is 2 inch raised or lowered, but most people go for around a 4 inch if they are doing lots of offroading, some go more, some go less
Many thanks to Buds Customs, for all their ongoing support
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Re: Lift laws
I know in Victoria a 2 inch cab lift is allowed and 2 inch Suspension lift, well that's what I was told when consulting an engineer. Best thing to do would be to phone the local Authorities. Vicroads couldn't care less along as an engineer signs off on it
Re: Lift laws
So whats it take to get an engineer to sign off.
Link Suspension Systems for your 79-95 hilux or 4Runner.
http://www.4wheelunderground.com" onclick="window.open(this.href);return false;
THE BEATINGS WILL CONTINUE UNTIL MORALE IMPROVES
http://www.4wheelunderground.com" onclick="window.open(this.href);return false;
THE BEATINGS WILL CONTINUE UNTIL MORALE IMPROVES
Banned
Re: Lift laws
Every engineer is different. What one engineer signs off as good, another engineer may say is bad.TacoRunner wrote:So whats it take to get an engineer to sign off.
Basically the only way to be certain it won't get questioned is to have lots of money and be a mass producer. Like Toyota and Nissan and the rest of the big names. Alot of their vehicles don't pass all the rules and regulations set for people building (or modifying) individual vehicles.
Luke.
Re: Lift laws
Wow, that blows. So thats why you guys build so many off road only vehicles.
So if you guys were welding on suspensio brackets and stuff what would it cost (estimate only please) for front and rear?
So if you guys were welding on suspensio brackets and stuff what would it cost (estimate only please) for front and rear?
Link Suspension Systems for your 79-95 hilux or 4Runner.
http://www.4wheelunderground.com" onclick="window.open(this.href);return false;
THE BEATINGS WILL CONTINUE UNTIL MORALE IMPROVES
http://www.4wheelunderground.com" onclick="window.open(this.href);return false;
THE BEATINGS WILL CONTINUE UNTIL MORALE IMPROVES
Re: Lift laws
Pretty sure its illegal to weld to the chassis for a road reg car but other states might be different.
Re: Lift laws
Zuri92 wrote:dont know about eleswhere, but legal height in qld is 2 inch raised or lowered
when lowering you have to maintain 100mm ground clearance and also maintain 2/3rds suspension travel
If ignorance is bliss, then why aren't there more happy teenagers?
Banned
Re: Lift laws
Not sure on cost with engineering and all.TacoRunner wrote:Wow, that blows. So thats why you guys build so many off road only vehicles.
So if you guys were welding on suspensio brackets and stuff what would it cost (estimate only please) for front and rear?
The post saying that welding to the chassis is illegal is not exactly right. Alot of Engineered rigs have welded stuff too the chassis.
Really though you should take everything you read in this thread with a grain of salt, and my post was more cynical than anything.
Your best bet would be to speak to one of the fabricators/garages in Australia that regularly deals with Engineers. There are a number of businesses/people on this forum that do this kind of work regularly and get it engineered.
Luke.
Who is online
Users browsing this forum: No registered users and 18 guests