Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where to brace chassie?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 145
Joined: Tue Mar 23, 2004 7:27 pm
Location: wollongong

Where to brace chassie?

Post by Rorza »

Hi ive got a 79 hilux and was wondering where the chassie should and could be braced to increase strength if anyone has done this and has advice or photos would be appreciated. Also any chassie work must be engineer approved?
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

have heard of chassis cracking before where the very front crossmember welds to the main chassis.
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

brace that biatch
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Posts: 145
Joined: Tue Mar 23, 2004 7:27 pm
Location: wollongong

Post by Rorza »

cool thx i try :)
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

alot of the older chassis seem to twist behind the cab, maybe it has something to do with laterall lenght verse a builder caring 15 ton a day for the last 20 years but i would measure this up for square and look at X bracing between the sparewheel mount and gearbox cross member.

they also seem to sag, but this is due to rust in the ctr of the frame so i would sus that out before you get any big plans.


NICK
TECH SCREW GURU
Top
Posts: 145
Joined: Tue Mar 23, 2004 7:27 pm
Location: wollongong

Post by Rorza »

thx i'll have to sus it all out before commencing just starting off now here with some research of where is best to brace etc.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest