I want to make some sliders for my 75 series ute and need some ideas as to how people have done the drivers side with the exhaust on the outside of the chassis rail.
I am looking at doing the sliders with a clamp style set up over the rail and bolts at the top .
Any ideas/pics to help me would be great
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Sliders with exhaust on outside of chassis rail
Moderators: toaddog, Elmo, DUDELUX
Sliders with exhaust on outside of chassis rail
BadLux wrote:Get her nice and drunk take her to the beach and root her brains out! half way through pull out dip it in the sand and ram it back in.. will sort out all your problems
Re: Sliders with exhaust on outside of chassis rail
No 1HZ
BadLux wrote:Get her nice and drunk take her to the beach and root her brains out! half way through pull out dip it in the sand and ram it back in.. will sort out all your problems
Re: Sliders with exhaust on outside of chassis rail
There was a thread in 4WD action that showed some good pictures. The problem is how to attach to the front. I used a tubular section that bolted to the cross member that holds the gearbox transfer in position. The rear ones I clamped around the chassis rails. Seems pretty strong - I've sat the car on them a couple of times and they protected it well.
Re: Sliders with exhaust on outside of chassis rail
I got ARB scrub rails on mine, and the was no physical way to make my exhaust fit out side the chassis rail. So now its inside the chassis rail and even then its very tight.
Re: Sliders with exhaust on outside of chassis rail
Just move the exhaust inside the chassis rails
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Who is online
Users browsing this forum: No registered users and 1 guest