Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fj45 steering column what to use to keep engineer happy

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 84
Joined: Tue Dec 20, 2005 9:13 pm
Location: stockton beach is my back yard

fj45 steering column what to use to keep engineer happy

Post by rod baker »

hi all i have an fj45 trayback with an efi 5 liter in her what do i use for the steering colum as the engineer has said colapsable is need any thoughts on the matter
thanks rod
1982 fj 60 with all late model gxl stuff 3 inches of lift ,snorkel ,lokker,bullbar,winch,ford 5 liter and a meggasquirt ECU
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Re: fj45 steering column what to use to keep engineer happy

Post by vk7ybi »

I've read that late model 40 series had a collapsible column in them, but I've never seen one myself..
Top
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Re: fj45 steering column what to use to keep engineer happy

Post by Ricko »

Are you doing an 60 series power steering column? Or just modifing the column to suit the engine?

If doing 60 conversion, easiest is use 55 column to 80 rag joint to 75 shaft (they are colapsable) to steer box. Engineer should have no issues as they are all cruiser parts and bolt together with no mods.
Bambrick Media - www.bambrickmedia.com.au
Redlands 4WD Centre - www.redlands4wd.com.au
Swan's Water & Tipper Hire - 0414 628 011
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest