Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux diff rebuild

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Hilux diff rebuild

Post by Willy Hilux »

Pulled down the rear diff in my lux today. 4.3:1 V6 type. Pulled the bottom bearing off the pinion and there was NO shim under the bearing.

My diff bloke told me there should be about a 77 tho shim under there. Whatever size there should be a shim he said.

Anybody else had no shim under there pinion bearing??

There was a 43 tho shim on top of the bearing with the crush spacer. This doesn't seem right either???????
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Re: Hilux diff rebuild

Post by vk7ybi »

There shouldnt be a shim in with the crush spacer. Is there a shim under the inner pinion bearing race in the housing? There must be some height adjustment there somewhere.. Did you paint a pattern check before you pulled it down?
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Re: Hilux diff rebuild

Post by Willy Hilux »

Na. Diff was smashed. Lasted a fair few comps. Taking it to my diff bloke in the morning for him to sort it out.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests