Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

opinions on suspension set up

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 51
Joined: Sat Jan 09, 2010 2:05 pm
Location: narellan

opinions on suspension set up

Post by kane86 »

i am about to start building my lux up for comps and weekend duties so i was just wondering what all the hilux guys out there think of this set up as a comp/ weekend hardcore trip set up will be running 37's most of the time but also occasionally 35's

front:
3in flex springs from locktup
5.5 in greasable shackles
crossover steering possibly with hydro assist
dropped hanger 1in
12 or 14in shock hoops with either bilstein or rancho long travel shocks (opinions on which is better for hoop size and also shocks please)
u bolt flip kit
5.29 diff raatios
also what do i need to do to move the front diff forward?

rear:
3in flex springs from locktup
buds customs 200mm shackles
inverted shocks
rancho long travel shocks or bilsteins (again opinions on the better of the two please)
5.29 diff ratios

would love to here any opinions and sugestions etc
P.S
i dont really want to go RUF and IFS rears as i need the car to be road registered and even though it is still going to be a pain in the arse with this set up i at least can get it engineered as long as the work is all done properly (i am upgrading the front and rear brakes etc to allow for the bigger tryes and everything else) where as with the RUF and IFS rears i cant get it engineered or pass RWC for rego
thanks
Kane
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Re: opinions on suspension set up

Post by Willy Hilux »

No rego with hydro assist. Why not 4 link the rear??
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 42
Joined: Wed Jul 29, 2009 11:10 pm
Location: melbourne

Re: opinions on suspension set up

Post by metak »

hate to tell u bud but ruf and ifs setup and a locktup set up invole the same work infact from what locktup have told me its more work in the rear as both front spring location and shackle points have to be moved in terms of shocks go with what you can afford as you will kill them at some point atleast thats the way i see it al low speed i can see a huge advantage of expensive shocks but on the road they should be more stable if they are correctly valved just my 2 cents i will be going a set of locktup rears in mine soon as i have ruf and ifs and the ifs just dont cut it
Posts: 17
Joined: Thu Jun 30, 2005 1:10 am
Location: Perth

Re: opinions on suspension set up

Post by MSBAVN »

If your looking at getting the Locktup gear just buy there front & rear kit will have everything you need plus a bit more.

Also use the Bilstien shocks they are 100% better than the Ranchos
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Re: opinions on suspension set up

Post by DUDELUX »

It doesnt matter whether you go RUF/IFS rears, or just Locktup springs, extended shackles are still illegal and as far as I know, cant be engineered.

Id go with the Bilsteins, and with the Locktup kit.
It would save alot of time, money and hassles trying to buy everything separately.

And go Hi-steer as well.
MrsForby wrote: Oh I desperately truly love the taco.
Posts: 154
Joined: Mon Jul 26, 2010 6:19 pm

Re: opinions on suspension set up

Post by monster fj »

go surf rear coil setup then throw away the hilux front diff then put a 3 link setup in along with the trusty gq front diff
Posts: 750
Joined: Mon Aug 25, 2008 12:06 am
Location: gold coast

Re: opinions on suspension set up

Post by johnsy86 »

well either leaf spring set up will work, go high steer instead of cross over, twin lockers, longfeilds and transfer gears or duels, leave the diffs as what ever ratio they are and some decent bar work
Lj80 tuff truck "mr Grumpy"
Posts: 413
Joined: Wed Dec 16, 2009 4:19 pm
Location: Redbank Plains, Near $hitswich

Re: opinions on suspension set up

Post by Zuri92 »

be ware that 5.29 gears are weaker than 4.88's.

and seriously, suspension is entirely up to you and what you want the car to do, what you can afford, and what your engineer will allow. there are a thousand different opinions on this website and to be quite honest, you cant really class any of them as wrong, although they are opinions and there are few people who have tried everything and can honestly give a well educated view on what will suit you.

do you want coils? do you want to stay leaves? do you want cheap or expensive? coils do work well and are pretty brainless to get them to flex good. leaves work well also, but a lot of guys do not understand how they work or how to set them up to work as good as they can. short of coilovers and very extensiveley modified coil setups, leaves can match them for flex, if set up right. but flex is not everything.

coils are easy to engineer, and require you to deviate less from the standard setup to achieve what you want than leaves do.

if you go for leaves though, you can have the same wheel travel, and spend less, than a coil conversion that will also work well. for example my suspension with high steer can be done for just over 2 grand and thats including steering and brake lines. but it may not be as legal as you desire.

dual cases in my mind are a must. and it is also a personal thing as to what diff you run, you can build a toyota to be strong like a built nissan, for similar or less costs incurred. dont bother with gq diffs, if you are gonna do it do it properly, pay the 3000 to 3500 bucks and get gu diffs, the cv's are stronger. or run 60 series diffs, aftermarket axles and longfields and your looking at 3 grand for the diffs, axles and longs and the gears you want. ready to go.
Many thanks to Buds Customs, for all their ongoing support
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Posts: 245
Joined: Tue Mar 17, 2009 9:23 pm
Location: Sydney

Re: opinions on suspension set up

Post by 4RUNNER_01 »

If your set on the locktup gear give them a call Chris will fill you in on all the options and he's great to deal with...

But in my experience coils are better then leaves but the kits they do are really good in either for luxs.
BOBBED 84' 4Runner 2.8L Chugger
35's, Locker's, High steer, RUF, 4 link rear, Crawler Gears.
Posts: 750
Joined: Mon Aug 25, 2008 12:06 am
Location: gold coast

Re: opinions on suspension set up

Post by johnsy86 »

Zuri92 wrote:be ware that 5.29 gears are weaker than 4.88's.
its only true when using factory ratios but then the 5.29 only came out in hi ace vans that im aware of, the weakest diff ratio that came out in a hilux is 4.88 the R&P are alot thinner than the other ratios, when going after market such as nitro gears the 5.29s are the way to go they will be alot softer on ur transfercase inputs and outputs when running larger rubber.
Lj80 tuff truck "mr Grumpy"
Posts: 18
Joined: Thu Dec 30, 2010 2:31 pm
Location: USA/Southern California

Re: opinions on suspension set up

Post by TacoRunner »

Ummmm. I can help with links if you're looking that direction.

http://www.4wheelunderground.com" onclick="window.open(this.href);return false;
Link Suspension Systems for your 79-95 hilux or 4Runner.
http://www.4wheelunderground.com" onclick="window.open(this.href);return false;
THE BEATINGS WILL CONTINUE UNTIL MORALE IMPROVES
Posts: 413
Joined: Wed Dec 16, 2009 4:19 pm
Location: Redbank Plains, Near $hitswich

Re: opinions on suspension set up

Post by Zuri92 »

touching on what johnsy said, my old 4.88 factory rear diff centre is still alive after i wheeled on it for a few years and it is now in wood, butchers surf and he is running a 1uz. my comment regarding diff gear strength was based on what i have been told and have read.
Many thanks to Buds Customs, for all their ongoing support
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Post Reply

Who is online

Users browsing this forum: No registered users and 132 guests