Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Jimny Body Lift

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Jimny Body Lift

Post by Squik »

Yay! Stimpy is finally lifted! Have cut the guards etc and now just need Greg to fit the 32's for me (looks kinda gay with the 30's)......and the Rockhopper 3 is in the fine tuning state at the moment!
Thanks to Ryan at SnakeRacing, Liam at Big Balls and Claudio the Boy Wonder (whose Jimny is even bigger than mine!) for the combined effort!
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

:D Hey can you post pics of how you cut your guards. Have a couple of mates lookin to go the chop on Jimny's :D
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

You're right Squik - new tyres are required :cool:

How many inches is the body lift?
DMA Founding Member #1 - Now Retired
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Post by Squik »

The body lift is 3" - Snake Racing blocks, bolts, extenders etc - a lot of hard work, prbably one of the more difficult ones to do - not for the faint hearted with all the stuffing around - but Ryan and Claudio have it down pat and are going to have a kit - including steering extender blocks, brake lines etc etc - available shortly.
There is so much to change, move and extend...... :? But the good news is that the airbag ones can be done and engineered as well.

The guards were copied off what Claudio had already done - see pics - mine could have been done a little neater but I am sourcing black plastic to create a complete cover over the cut area, will be same as original.
Make sure you leave the second clip, see photos, so everything stays in place.
You remove the bottom sill cover, then undo all the clips and remove the guards. It can be done without completely pulling them off so you dont destroy the strip between the guard and body, that's how I did it.
I just bent back the metal inner lip using multigrips and a hammer (to be filed smooth and painted yet).
Line up the front one with the bottom bracket - see photo - and just cut up on an angle with a jigsaw or even a small hacksaw - I used both. Scarily, the plastic cuts like butter.

I have one guard left to do, so I can step by step it if you like and post it.
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Squik wrote:The body lift is 3" - Snake Racing blocks, bolts, extenders etc - a lot of hard work, prbably one of the more difficult ones to do - not for the faint hearted with all the stuffing around - but Ryan and Claudio have it down pat and are going to have a kit - including steering extender blocks, brake lines etc etc - available shortly.
There is so much to change, move and extend...... :? But the good news is that the airbag ones can be done and engineered as well.

The guards were copied off what Claudio had already done - see pics - mine could have been done a little neater but I am sourcing black plastic to create a complete cover over the cut area, will be same as original.
Make sure you leave the second clip, see photos, so everything stays in place.
You remove the bottom sill cover, then undo all the clips and remove the guards. It can be done without completely pulling them off so you dont destroy the strip between the guard and body, that's how I did it.
I just bent back the metal inner lip using multigrips and a hammer (to be filed smooth and painted yet).
Line up the front one with the bottom bracket - see photo - and just cut up on an angle with a jigsaw or even a small hacksaw - I used both. Scarily, the plastic cuts like butter.

I have one guard left to do, so I can step by step it if you like and post it.


Yeah that'd be cool thanks :D
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

what is it with snake racing and 3" suzuki body lifts? with all their resources, you'd think they'd be able to make 2" solid blocks that screw onto the captive body studs. 2" is so much simpler and safer than 3".
Last edited by N*A*M on Tue Apr 06, 2004 4:40 pm, edited 1 time in total.
Posts: 1175
Joined: Mon Dec 09, 2002 6:25 pm
Location: sydney

Post by XXXL80 »

looks sweet squik... :D

might look at a body lift for the 80 one day :roll:
my 80 is gone :(

check out my new website:

http://members.optusnet.com.au/pearsallk/index.html
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

N*A*M wrote:what is it with snake racing and 3" suzuki body lifts? with all their resources, you'd think they'd be able to make 2" solid blocks that screw onto the captive body studs. 2" is so much simpler and safer than 3".


Remind me of companies like Calmini... 6" suspension lifts for sierra's.. people just want to have a tall truck Nam. :?
DMA Founding Member #1 - Now Retired
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

greg wrote:Remind me of companies like Calmini... 6" suspension lifts for sierra's.. people just want to have a tall truck Nam. :?


ppl want a tall truck, and buy a zook??? :? hehehe
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Post by Squik »

Hmmmmm.......I recall a comment about the best sailboats have the shortest hull but the tallest sails.....
And something about short men making up for their lack of height in other ways ;) ......love short men :twisted:
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Post by Squik »

All theories aside.....Rockhopper 3 needs 32's or over.....32's or over need a 3" body lift.....kinda catch 22 situation...not much choice really...
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest