Electrician in Wollongong ?

[ferog]

I had a customer/friend put my work van together internally which included doing the electrics (he's not an electrician but assured me he could do it easily) I have a 240v setup to run my hyrdrobath, clippers and other stuff via an extension lead to the clients powerpoint.

I've been told by another customer who's a licenced elecrician that the job he did is very unsafe. I'm working with water and electricity all day long so it's a worry.

Is there anyone on here (licenced) who could have a look at it for me, and possibly do some rewiring shortly after? Actually I would say it would definately need to be redone, it's a mess. I'm in Albion Park. Will come to you.

I've learnt my lesson twice now, never again.

[lump_a_charcoal]

I'm near Penrith if you cannot find someone closer Em.

[ferog]

I'm near Penrith if you cannot find someone closer Em.

Thanks Linc!

I'd rather give my money to a fellow OL member if I can.

[80's_delirious]

If it is suspect, get it fixed straight away. You dont get many second chances with electricity.

Can you go for low voltage equipment?

[RUFF]

Come on guys there has to be someone on the south coast that can help Emma out. From what she has told me its a fatality waiting to happen.

[krusty182]

Can't help from here, but for your safety in the meantime, it would be prudent to make sure that you supply the van from an RCD protected circuit (i.e. it has a "safety switch").
Probably the best way to ensure this is to buy an extension lead with an inline RCD and use that to supply the van.

[blackmav]

Do you still need help with this?

[Pops]

More than happy to help out..... little prob is that i live on the Central coast. Call me if you have any questions - 0404 855 060