Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1hd-ft into hzj75

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 10
Joined: Sat Mar 19, 2011 10:39 pm

1hd-ft into hzj75

Post by Gaston »

Could anyone tell me if 1hd-ft go straight into my hzj75? What about the clutch and gear box? What modification will I have to make. eg. (throttle cable?, bel housing?)
Posts: 8
Joined: Mon Jan 03, 2011 5:43 pm

Re: 1hd-ft into hzj75

Post by tuf75series »

mate a fair bit has to be done as it has a differnt gear box.. all so ones a mechainical pump other is electronic so heap of wires computers exc . i think a 12ht would be a easyer swap same gear box as well i think...
Posts: 10
Joined: Sat Mar 19, 2011 10:39 pm

Re: 1hd-ft into hzj75

Post by Gaston »

What about 1hdt?
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 1hd-ft into hzj75

Post by 80's_delirious »

1HD-T and 1HD-FT are almost identical. 1HD-T has 12valve head, 1HD-FT has 24valve head. There are minor differences, but the block, clutch, bell housings, gearbox compatibility etc are all the same, both are full mechanical injection(no electronics). There would be no difference in the amount of work required to fit either of these.

1HD-FTE is the same engine as 1HD-FT, but electronic injected and capable of more power, but requires chip and tune etc and is a more complicated conversion due to the electronics

What gear box do you have in your Hzj75?



PS. why not continue your other thread on this?
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 20
Joined: Thu Mar 03, 2011 3:31 pm
Location: Perth, Western Australia

Re: 1hd-ft into hzj75

Post by coops62 »

I just had one dropped into my 80 series, can't imagine it would be too different
Coops
80 Series Pov Pack with 1HD-FT, 3" exhaust, King Springs 2" lift & Raw Nitro Max shocks, 2" body lift, LR Tank, F&R Lockers, Dual Wheel Carrier, 33" MTZ's
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests