Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vibrations when engine braking
Moderators: toaddog, Elmo, DUDELUX
Vibrations when engine braking
Hey Guys I have an 89 4runner. When driving particulary at llower speeds around 40km/h the car vibrates. It is worst when deccelerating using engine braking.
Have checked Uni joints and they are fine.
Someone suggested maybe engine mounts. If so how do i check engine mounts.
All help is greatly appreciated.
Have checked Uni joints and they are fine.
Someone suggested maybe engine mounts. If so how do i check engine mounts.
All help is greatly appreciated.
Re: Vibrations when engine braking
I would suspect the rear diff, particually the pinion bearings.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Re: Vibrations when engine braking
check to see if you have lost any tail shaft weights, if its a mild vibration
Re: Vibrations when engine braking
I wouldn't call it mild.
I will check the rear pinion tonight. and report back.
Also how do I check my enigine mounts are ok
I will check the rear pinion tonight. and report back.
Also how do I check my enigine mounts are ok
Re: Vibrations when engine braking
I had this in a hilux but it was a lost bolt on the gearbox mount.bagginsoftheshire wrote:I wouldn't call it mild.
I will check the rear pinion tonight. and report back.
Also how do I check my enigine mounts are ok
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Re: Vibrations when engine braking
Ive had this before just after a had a new engine put in, turned out to be a combination of the uni joints being the worst of it, and that my front diffs were still locked in. Also engine mounts my uncle had problems with in his extrail after bumpy beach 4x4ing and that made it run incredibly bad...
Mitch
Mitch
Got the NUTZ to follow my RUTZ?
Re: Vibrations when engine braking
maybe also try wheel bearings aswell... I know they have semi floating hubs and they are different to landcruisers but it maybe something you can rule out...
Both a mate and i have had this vibration through our cruisers and weve replaced uni's and checked our pinion shaft bearings and that but yeah turned out being wheel bearings, it did the same as yours... Vibrating at low speeds and worse on deceleration/engine braking
ours are all sweet now so it could be something to check and possibly rule out.
Hope it helps mate...
Both a mate and i have had this vibration through our cruisers and weve replaced uni's and checked our pinion shaft bearings and that but yeah turned out being wheel bearings, it did the same as yours... Vibrating at low speeds and worse on deceleration/engine braking
ours are all sweet now so it could be something to check and possibly rule out.
Hope it helps mate...
I mean, a turbo is great and all, but i'd rather be blown...
Re: Vibrations when engine braking
Thanks for the help guys. Has been resolved. Turns out it was the uni joints there was no play when i checked them first, I think they must have bound up. Woops.
All good now thanks again Outers.
All good now thanks again Outers.
Who is online
Users browsing this forum: No registered users and 156 guests