Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tyre size s1 disco
Moderator: Micka
tyre size s1 disco
whats the biggest size tyre you can run on a s1 disco with 2in lift preffer not to have to cut gaurds
Re: tyre size s1 disco
With guaranteed no cutting, 245/70/16. Spring lifts have zero affect on tyre clearance.
http://members.shaw.ca/jbarge/tires.html" onclick="window.open(this.href);return false;
http://members.shaw.ca/jbarge/tires.html" onclick="window.open(this.href);return false;
[color=red]1991 Landrover 90 ex-MOD[/color]
Re: tyre size s1 disco
I ran 235/85 16 for 6 years with no need to cut, on 2 different D1s.
I like Salt
Re: tyre size s1 disco
The rubbing happens at full articulation. You either had something limiting articulation or you were not doing things to flex the suspension to the maximum.
[color=red]1991 Landrover 90 ex-MOD[/color]
Re: tyre size s1 disco
They rubbed lots underneath the top of the wheel arch - didn't worry me, was just a reminder that it was fully flexing, but I never needed to cut. As an aside the same set of tyres on the third Disco 1 I owned (after writing off the second one) did catch the edge and required a camel cut of the guard to clear, but this didn't happen on the first two - never worked out why?red90 wrote:The rubbing happens at full articulation. You either had something limiting articulation or you were not doing things to flex the suspension to the maximum.
I like Salt
Re: tyre size s1 disco
Factory build tolerances are plus or minus an inch.
[color=red]1991 Landrover 90 ex-MOD[/color]
Re: tyre size s1 disco
It will also depend a bit on tyre brands, they do differ slightly.
I have an OME 2" lift and BFG KM2 235/85 16's and had to do a camel cut on the back of the rear guards. Approx 50mm at the bottom tapering up about 25-30cm up the guard.
The plates that hold up the rear mud flaps also got a bit of rub on full articulation but a bash with a hammer fixed that pushing them back a bit.
You can possibly put extended bump stops on and you might get around cutting guards.
Also I had to adjust the steering stops a couple of turns in one direction as I got a little rub on full lock.
No need to extend brake lines with only a 2" lift.
I have since put in 30mm wheel spacers also which meant cutting front of rear guards, more from back of rear guards and rear of front guards.
I have an OME 2" lift and BFG KM2 235/85 16's and had to do a camel cut on the back of the rear guards. Approx 50mm at the bottom tapering up about 25-30cm up the guard.
The plates that hold up the rear mud flaps also got a bit of rub on full articulation but a bash with a hammer fixed that pushing them back a bit.
You can possibly put extended bump stops on and you might get around cutting guards.
Also I had to adjust the steering stops a couple of turns in one direction as I got a little rub on full lock.
No need to extend brake lines with only a 2" lift.
I have since put in 30mm wheel spacers also which meant cutting front of rear guards, more from back of rear guards and rear of front guards.
'98 D1 300TDi Auto. 2" OME lift. BFG 235/85 16. Custom Sliders. Custom Front and Rear Bars. Come Up 9500 Winch.
Who is online
Users browsing this forum: No registered users and 3 guests