Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
macarthur 4x4 wrote:Team Bundy has broken 2 also and never recieved warranty on them...And Paul only runs 37's too...... over priced i say... hence i never went to Nissan diff and stayed with toyota cause Booby will warrant them no questions asked...
yep longfields are nearly half the price. Bobby just gave us warranty on one of ours, we actually didn't expect it or really ask for it, he is just that honest he just offered. It had only cracked the cage on a 30spl that was put in 2 days before tufftruck 2005 and honestly has never been looked at since, so it could have been cracked for a while. We really only asked to buy a replacement cage, but he offered a warranty unit. How can you beat that! that poor cv has done 6 tufftrucks and nearly 40comps and many wheelin weekends...... longfeilds all the way i say!!
Yep his good that way .... Iv had 2 outers and 1 inner axle replaced under longfield warranty since June last yr.... Yes you can brake longfields also but bobby warrants his stuff... Cal doesnt
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
latest set of cals are black not chrome. so i dont know if they are made from something different or just a different factory. The splines are slighty different. instead of the spline groove tapering out, it just stops.
'91 Toyota Surf SSR Ltd. 2.4 TD Auto, Coil SAS, Duals, 4.88, Longs w/ front ARB, 35" MTRs
'97 Toyota Surf SSR-G Intercooled 3.0 TD Auto. 2" lift, Xrox bar, Waeco, Drawers, 32" BFGs
That is correct, I got the short side (one that broke) before they went out of stock and waited for the long side untill a week ago (darker color).
Does anyone make axles out of 4340 unstead of 4140 (Cals)?
I know snakeracing has CV's out of 4340, but no axle
Hey mate, I was running 44in groundhogs on my GU ute, all my running gear was standard, 42TD 5sp with the big rear diff I never once had any problem with powering and no breakages. I was running factory CV's which are very strong and those rear diffs are unbreakable, I am a big fan of the old right foot locker too gave it death every weekend.
Devising a sceme to gather more funds
---------------------------------------------
Project MA55GU commencing sooon
mine ended up lasting tuff truck and since fine. Done a short side front axle in the marbles being stupid just out of the bonusline. Sheared at the cv spline end. Thats a 3t truck below 10psi in the tyres. Happy with that, so im putting another front diff in the rear.
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
the question i still ask my self and others is: if you put in stronger cv's and axles with diff lock, doesn't the most natural place for something to break head up the line? by this i mean uni's, propshaft, and then tranfer case? i think it all depends on driving style, what track your on and type of tyre. i'm only running baby tyres for now (35s) and will probably learn alot when i go up in size. i run standard cv's and axles - open diff and for now happy to replace cvs if they snap (yes its a c@#t of a job). as i said earlier - a lot can go into breaking/ not breaking anything.
'99 Gq ute - the "farm" truck now
'89 Gq Ute - Mudswap - Big, Bright Yellow and loves a bog hole
*newest edition to the stable* -- '92 gq efi wagon - rusty roof ready for the chop up!!!!!
