Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Handheld UHFs Tech

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Handheld UHFs Tech

Post by De-lux »

long story short, i've got two handheld UHFs I purchased overseas assuming they'd work fine here, but I've found out they're scanners which can only operate between 400 MHz and 470 MHz. FYI, Our channels for general communications (Channels 1 - 40) use the frequency 476 - 478 MHz. They are cool handsets, I don't know what brand, they only say "IC-995" on the front. They are 5W units, so can put out some good signal, and have rechargable batteries with docking stations.

After searching the net I have found out that these are used for specific communications in AU - for example I can get the ambulance frequency here in Brisbane...

Does anyone know if there is a way to change thesse to broadcast over the normal signal frequency so I can use it with the in car UHF's?

Failing that, does anyone want to buy the set for what it owes me ($120)?

Pic below..

Image
indubitably
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Re: Handheld UHFs Tech

Post by phippsy »

Hy Mick, I can only help by saying that IC is usually a prefix for an Icom radio.
Posts: 320
Joined: Sun Feb 02, 2003 2:28 pm
Location: south australia

Re: Handheld UHFs Tech

Post by crispy »

Bascially no, theyre designed to only work in their specific frequency bands. Chuck them on ebay.
The road to enlightenment requires Four Wheel Drive
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Re: Handheld UHFs Tech

Post by De-lux »

Thanks team.. I might whack them on ebay and see if I can get my dollas back
indubitably
Posts: 1850
Joined: Sat Mar 11, 2006 4:24 pm
Location: Melbourne

Re: Handheld UHFs Tech

Post by Deleted User »

I think regarding UHF`s , people should have a look at this --------------

http://www.uhfcb.com.au/80-Channel-UHF-Information.php" onclick="window.open(this.href);return false;
Posts: 470
Joined: Wed Jan 24, 2007 12:21 pm
Location: Australia

Re: Handheld UHFs Tech

Post by 351ciofgrunt »

TheGatta wrote:I think regarding UHF`s , people should have a look at this --------------

http://www.uhfcb.com.au/80-Channel-UHF-Information.php" onclick="window.open(this.href);return false;
so will our current 40 channel UHF's still work when they bring out the new channels?
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Posts: 320
Joined: Sun Feb 02, 2003 2:28 pm
Location: south australia

Re: Handheld UHFs Tech

Post by crispy »

351ciofgrunt wrote:
TheGatta wrote:I think regarding UHF`s , people should have a look at this --------------

http://www.uhfcb.com.au/80-Channel-UHF-Information.php" onclick="window.open(this.href);return false;
so will our current 40 channel UHF's still work when they bring out the new channels?
Yeah will still work fine just will be audio quality differences when talking to a 80 ch radio. in 2016 or so 40 ch will become 'illegal' to use
The road to enlightenment requires Four Wheel Drive
Post Reply

Who is online

Users browsing this forum: No registered users and 125 guests