Hey Guys,
I'm trying to work out how much flex I can get out of standard length springs.
I've got EFS 2 or 3 inch lifted at the moment with Koni adjustables all round, front
flex is ok, back is ordinary even with 2 leaves per side removed, can't remove anymore without
installing a track bar (next on the list)
Anyone got some good pics of how much flex you can get out of standard length springs, much appreciated.
Extended shackles and even 3/4 elliptic setup was my thinking, anyone have any experience with both?
Cheers, Dano
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Standard Length Springs...How Much Flex???
Moderators: toaddog, Elmo, DUDELUX
Re: Standard Length Springs...How Much Flex???
What vehicle?
Re: Standard Length Springs...How Much Flex???
What colour are your shackles??
MrsForby wrote: Oh I desperately truly love the taco.
Re: Standard Length Springs...How Much Flex???
Hey Guys, Sorry Ln106 Lux
Zinc plated greasable efs shackles....lol
Dano.
Zinc plated greasable efs shackles....lol
Dano.
Re: Standard Length Springs...How Much Flex???
the best thing to do is move your shackle mount forward to improve the shackle angle, short of doing that you are very limited as far as a single shackle is concerned (i have tried to help out the guy down the street) and have got it as good as we can with moving the hanger being the only way to get more droop without a drop shackle etc
alternativeley you could run a drop shackle, but i personally are strongly against them, a buggy leaf (3/4 eliptical) is a slightly better option in some ways but worse in others. if your gonna go to the effort of cutting the hanger off to do a buggy leaf you may aswell relocate it and do it properly .
to get good flex fron stock length springs you need very few leaves, due to the length and lack of vehicle weight, so you will need a trac bar.
alternativeley you could run a drop shackle, but i personally are strongly against them, a buggy leaf (3/4 eliptical) is a slightly better option in some ways but worse in others. if your gonna go to the effort of cutting the hanger off to do a buggy leaf you may aswell relocate it and do it properly .
to get good flex fron stock length springs you need very few leaves, due to the length and lack of vehicle weight, so you will need a trac bar.
Many thanks to Buds Customs, for all their ongoing support
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Re: Standard Length Springs...How Much Flex???
Thanks Mate,
So a buggy leaf would be on the cards....
And does anyone know if extended shackles would be of any advantage, my thoughts would be yes.
Cheers, Dano.
So a buggy leaf would be on the cards....
And does anyone know if extended shackles would be of any advantage, my thoughts would be yes.
Cheers, Dano.
Re: Standard Length Springs...How Much Flex???
extended shackles do not always flex better than standard length ones. length of shackle does impact on flex and suspension action, but so does the angle of it. a well set up 100mm shackle can and will flex better than a 150mm shackle poorly setup with the same spring pack.
if you set up your shackle well it is also far more legal than all the other options
if you set up your shackle well it is also far more legal than all the other options
Many thanks to Buds Customs, for all their ongoing support
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Re: Standard Length Springs...How Much Flex???
OK, cheers mate.
Anyone have any pics of standard springs setup well and flexing?
Cheers, Dano
Anyone have any pics of standard springs setup well and flexing?
Cheers, Dano
Who is online
Users browsing this forum: No registered users and 0 guests