Anyone interested in a buildup thread as above?
My wife went to Darwin for two weeks, leaving me home alone with a plasma cutter and a mig. And a NT Zook and a WT wreck.
MoooahaHaHaHa.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
12A Auto SPOA RUF WT/NT Buildup?
12A Auto SPOA RUF WT/NT Buildup?
V.W.Dave said:
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
Re: 12A Auto SPOA RUF WT/NT Buildup?
All in 2 weeks hmmm good luck.
But I would put it in the correct section if you want it to stay on here.
But I would put it in the correct section if you want it to stay on here.
Re: 12A Auto SPOA RUF WT/NT Buildup?
Sad but true.
My new front diff, bent on left hand end.
My new rear, seems to have broken side gears.
Anyone got some WT diffs in Canberra?
Three days past the deadline, runs and drives but some shocking noises from the rear.
Not buying Zook wreck from Alco braindeads again.
No Faith.
My new front diff, bent on left hand end.
My new rear, seems to have broken side gears.
Anyone got some WT diffs in Canberra?
Three days past the deadline, runs and drives but some shocking noises from the rear.
Not buying Zook wreck from Alco braindeads again.
No Faith.
V.W.Dave said:
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
Re: 12A Auto SPOA RUF WT/NT Buildup?
I probably have what you need. PM sent.MazdaSpater wrote:Sad but true.
My new front diff, bent on left hand end.
My new rear, seems to have broken side gears.
Anyone got some WT diffs in Canberra?
Three days past the deadline, runs and drives but some shocking noises from the rear.
Not buying Zook wreck from Alco braindeads again.
No Faith.
Re: 12A Auto SPOA RUF WT/NT Buildup?
need photo's. Have a bit of an interest of a 12a auto sierra
Re: 12A Auto SPOA RUF WT/NT Buildup?
Got a heap of photos, trying to get it going, then will do a buildup thread.
Got a bare axle housing, building it up, Thanks Rob.
Seems promising to drive. Only had it to 4000 Rpm, much more power than stock.
Got a bare axle housing, building it up, Thanks Rob.
Seems promising to drive. Only had it to 4000 Rpm, much more power than stock.
V.W.Dave said:
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
Who is online
Users browsing this forum: No registered users and 69 guests