Everything dumbdunce said is bang on the money.
EGT's dont always tell the whole story.
I wouldnt give advice on what you could wind the engine up to though. All I would recommend is as much intercooler as $$ will allow, and very sensible fueling.
Basically what I recommend to any customer thats not just wanting max hp for racing purposes etc..
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3B Middy with PWR water to air intercooler set up
Moderators: toaddog, Elmo, DUDELUX
Re: 3B Middy with PWR water to air intercooler set up
Sorry I didn't clarify, I have a bj74 with a 13bt running a peak of 21.5psi for the last 20,000km. I normally ease up at a max of 700c pre turbo egts. I also know of a 3b compound turbo happily running 20psi. Just trying to find other people who have played with these. Seems lots of people happily shove 20psi+ into other factory turbo deisels
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Who is online
Users browsing this forum: No registered users and 1 guest