Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
G'day Guys
I recently purchased some GU steels to go onto my NP GXL.
I have read that the mentioned combo will work but am interested at how much the wheels will protrude from the guards and
what needs to be cut to make them fit.
NJV6 wrote:Since you have them, I suggest you try them on......
But i'd say they will stick out - lots. That is if they even fit, they may not.
The GU's are offset 15mm more than the PJ standards. Running 265/75R16's now so add another 10mm and that comes
to a total of 25mm out and 20mm in. Plus a larger Dia. Sounds ok to me.............
Well finally go my arse into gear and bought some GU rims and some 285/75R16 Silverstone MT-117 Sports.
They fit just inside the guards but I think I'm going to have to install 40mm guard extensions
as they flick a lot of crap up and in 5 minutes of fun the PJ has changed colours.
