Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tailshafts for high pinion

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 65
Joined: Tue Jan 14, 2003 9:37 pm
Location: Brisbane

tailshafts for high pinion

Post by bazuky »

just did a high pinion conversion for black lion swb and after reading on here that after the required swaping of crown wheel and center it just bolts right in and away you go happy motoring .how ever the tail shaft bolt pattern is about 20mm smaller what do we need to do to fix this can we just swap the flange on the pinion over with the original rear are they the same spline or are there any other solitions ?
Top
Posts: 1124
Joined: Fri Aug 03, 2007 4:14 pm
Location: Douglas park

Re: tailshafts for high pinion

Post by joshy »

yea the flanges will just swap straight over.
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
Top
Posts: 474
Joined: Thu Apr 24, 2008 7:31 pm
Location: Canberra

Re: tailshafts for high pinion

Post by A.J. »

BUT! The diff backlash will need to be setup correctly again after you swap the flanges.

I have swapped flanges, ignoring the setup and just bolting the flange back on, works so far but if I had the chance again, I'd pull it out and set it up properly.
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests